# Setting up new grbl controller

**URL:** <https://community.inventables.com/t/setting-up-new-grbl-controller/123880>\
**Category:** Uncategorized\
**Created:** [October 26, 2021, 9:35pm UTC](https://community.inventables.com/t/setting-up-new-grbl-controller/123880 "2021-10-26T21:35:00Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![WayneAmbrose](https://avatars.discourse-cdn.com/v4/letter/w/fbc32d/32.png) [@WayneAmbrose](https://community.inventables.com/u/WayneAmbrose)\
**Post date:** [October 26, 2021, 9:35pm UTC](https://community.inventables.com/t/setting-up-new-grbl-controller/123880/1 "2021-10-26T21:35:00Z")

</div>

i had to buy a new controller now i need to modfy some of the settings  
can i do that with easel or do i need a diffrent program

---

<div class="post-metadata">

**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\
**Post date:** [October 26, 2021, 9:44pm UTC](https://community.inventables.com/t/setting-up-new-grbl-controller/123880/2 "2021-10-26T21:44:20Z")

</div>

If they are the grbl settings you can modify within easel.  
Go to machine\> general settings \> machine inspector and they can be setup in there 👍

---

<div class="post-metadata">

**Author:** ![WayneAmbrose](https://avatars.discourse-cdn.com/v4/letter/w/fbc32d/32.png) [@WayneAmbrose](https://community.inventables.com/u/WayneAmbrose)\
**Post date:** [October 26, 2021, 10:24pm UTC](https://community.inventables.com/t/setting-up-new-grbl-controller/123880/3 "2021-10-26T22:24:19Z")

</div>

can you explain how to do this iclicked on the line i want to change and nothing  
i typed in the line at top of page $132=100 it said invalid paramiter

---

<div class="post-metadata">

**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\
**Post date:** [October 26, 2021, 10:47pm UTC](https://community.inventables.com/t/setting-up-new-grbl-controller/123880/4 "2021-10-26T22:47:46Z")

</div>

Hmm, it works for me 🤷‍♂️

[![](https://img.youtube.com/vi/prGu0x_lzS0/maxresdefault.jpg "Changing Grbl Settings in Easel's Machine Inspector - (Do Not Publish)") ](https://www.youtube.com/watch?v=prGu0x_lzS0)

---

<div class="post-metadata">

**Author:** ![WayneAmbrose](https://avatars.discourse-cdn.com/v4/letter/w/fbc32d/32.png) [@WayneAmbrose](https://community.inventables.com/u/WayneAmbrose)\
**Post date:** [October 26, 2021, 11:19pm UTC](https://community.inventables.com/t/setting-up-new-grbl-controller/123880/5 "2021-10-26T23:19:01Z")

</div>

thank you  
Im making changes now

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [January 24, 2022, 11:19pm UTC](https://community.inventables.com/t/setting-up-new-grbl-controller/123880/6 "2022-01-24T23:19:16Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.