# Securing metal

**URL:** <https://community.inventables.com/t/securing-metal/119053>\
**Category:** X-Carve\
**Created:** [June 12, 2021, 11:18pm UTC](https://community.inventables.com/t/securing-metal/119053 "2021-06-12T23:18:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Melanie1](https://avatars.discourse-cdn.com/v4/letter/m/e495f1/32.png) [@Melanie1](https://community.inventables.com/u/Melanie1)\
**Post date:** [June 12, 2021, 11:18pm UTC](https://community.inventables.com/t/securing-metal/119053/1 "2021-06-12T23:18:45Z")

</div>

How do I clamp down metal to carve so it won’t move?

---

<div class="post-metadata">

**Author:** ![MartinW.Mcclary](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/martinw.mcclary/32/63385_2.png) [@MartinW.Mcclary](https://community.inventables.com/u/MartinW.Mcclary)\
**Post date:** [June 13, 2021, 1:26am UTC](https://community.inventables.com/t/securing-metal/119053/2 "2021-06-13T01:26:37Z")

</div>

I might use some double sided tape and mount the metal to a piece of material that clamps well to your machine. Also consider slowing down your feed rate? I haven’t cut any metal in years and never attempted in on my xcarve.

---

<div class="post-metadata">

**Author:** ![BrandonR\_Parker](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandonr_parker/32/13853_2.png) [@BrandonR\_Parker](https://community.inventables.com/u/BrandonR_Parker)\
**Post date:** [June 13, 2021, 2:26am UTC](https://community.inventables.com/t/securing-metal/119053/3 "2021-06-13T02:26:45Z")

</div>

Clamps, double-sided carpet tape, or the beloved masking tape (blue painter’s tape) and superglue method. Vacuum fixtures can also be used if you want purchase them…

{:0)

Brandon Parker
