# Routing Dimensional Lumber

**URL:** <https://community.inventables.com/t/routing-dimensional-lumber/44079>\
**Category:** Projects\
**Created:** [October 21, 2017, 1:57am UTC](https://community.inventables.com/t/routing-dimensional-lumber/44079 "2017-10-21T01:57:36Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![WorkinWoods](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/workinwoods/32/44400_2.png) [@WorkinWoods](https://community.inventables.com/u/WorkinWoods)\
**Post date:** [October 22, 2017, 7:33pm UTC](https://community.inventables.com/t/routing-dimensional-lumber/44079/23 "2017-10-22T19:33:05Z")

</div>

oh okay yeah just plunge I guess if using easel

of yeah man for sure that linear z really is pretty nice I really only see 2 downsides to it

that being the added weight on the delrin v-wheels

and possibly the little linear bearings that they use not sure on this but I dont see a place for lubing them and I dont think the wipers are designed for wood contaminates and you have to take the assembly apart to lube it

---

<div class="post-metadata">

**Author:** ![JDM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jdm/32/84169_2.png) [@JDM](https://community.inventables.com/u/JDM)\
**Post date:** [October 22, 2017, 7:36pm UTC](https://community.inventables.com/t/routing-dimensional-lumber/44079/24 "2017-10-22T19:36:59Z")

</div>

I have to keep fast access to a stock machine, but would definitely like to play with it.

---

<div class="post-metadata">

**Author:** ![WorkinWoods](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/workinwoods/32/44400_2.png) [@WorkinWoods](https://community.inventables.com/u/WorkinWoods)\
**Post date:** [October 23, 2017, 12:51pm UTC](https://community.inventables.com/t/routing-dimensional-lumber/44079/26 "2017-10-23T12:51:43Z")

</div>

I am going to need a bigger shop lol 😍

---

<div class="post-metadata">

**Author:** ![JustinBusby](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/justinbusby/32/30906_2.png) [@JustinBusby](https://community.inventables.com/u/JustinBusby)\
**Post date:** [October 25, 2017, 3:04am UTC](https://community.inventables.com/t/routing-dimensional-lumber/44079/27 "2017-10-25T03:04:46Z")

</div>

What step over did you use?

---

<div class="post-metadata">

**Author:** ![JDM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jdm/32/84169_2.png) [@JDM](https://community.inventables.com/u/JDM)\
**Post date:** [October 25, 2017, 3:05am UTC](https://community.inventables.com/t/routing-dimensional-lumber/44079/28 "2017-10-25T03:05:27Z")

</div>

the default 40%

---

<div class="post-metadata">

**Author:** ![ShaneBell](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/shanebell/32/73291_2.png) [@ShaneBell](https://community.inventables.com/u/ShaneBell)\
**Post date:** [October 27, 2017, 11:29pm UTC](https://community.inventables.com/t/routing-dimensional-lumber/44079/29 "2017-10-27T23:29:51Z")

</div>

What speed was the dewalt on for that run if you don’t mind.

[Previous page](https://community.inventables.com/t/routing-dimensional-lumber/44079.md?page=1)