# Router cabinet build

**URL:** <https://community.inventables.com/t/router-cabinet-build/30487>\
**Category:** Projects\
**Created:** [November 23, 2016, 11:49pm UTC](https://community.inventables.com/t/router-cabinet-build/30487 "2016-11-23T23:49:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JdBolderson](https://avatars.discourse-cdn.com/v4/letter/j/e5b9ba/32.png) [@JdBolderson](https://community.inventables.com/u/JdBolderson)\
**Post date:** [November 23, 2016, 11:49pm UTC](https://community.inventables.com/t/router-cabinet-build/30487/1 "2016-11-23T23:49:19Z")

</div>

Hello, This may have been answered somewhere, but, can someone give me the fully extended height of the z axis and router assembly on the 1000mm with the dewalt 610 spindle. I am making a drop down table and cabinet for my future router and would like to have it built before it comes in. I just need to know how much clearance I should allow for when it is closed. Thank you

---

<div class="post-metadata">

**Author:** ![GeoffSteer](https://avatars.discourse-cdn.com/v4/letter/g/7c8e57/32.png) [@GeoffSteer](https://community.inventables.com/u/GeoffSteer)\
**Post date:** [November 23, 2016, 11:57pm UTC](https://community.inventables.com/t/router-cabinet-build/30487/2 "2016-11-23T23:57:30Z")

</div>

A search will show that this has been asked a few times.  
here’s one thread:

> [@Minimum footprint for enclosure for X-Carve 1000](https://community.inventables.com/t/minimum-footprint-for-enclosure-for-x-carve-1000/25973):
>
> Hello! I am thinking on making a little enclosure for my 3d printers and xcarve… is: 120 cms W x 110 cms L x 60 cms H Is that good enough? (this is for an appartment, so smaller is better!) I want to keep all the electronics attached to the side.