# Rounded edges? **URL:** \ **Category:** Projects\ **Created:** [June 7, 2016, 8:22pm UTC](https://community.inventables.com/t/rounded-edges/24687 "2016-06-07T20:22:08Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![RamonDelValle](https://avatars.discourse-cdn.com/v4/letter/r/85e7bf/32.png) [@RamonDelValle](https://community.inventables.com/u/RamonDelValle)\ **Post date:** [June 7, 2016, 8:22pm UTC](https://community.inventables.com/t/rounded-edges/24687/1 "2016-06-07T20:22:08Z")
Alright so I’ve finally got the basics down and i want to start working on my real project. Making a box mod for vaping andni have my blanks all ready to carve. My only issue is rounding off the edges of my box. What bit would I need and how would I set this up in easel? Im attaching the pictures of my blank and then the general shape of what I’m hoping my finished product would be. Any ideas? ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/3/f320f0dd6cd8735d508d79de5247588c6a1c14d5.jpg) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/c/0cea6e6b254ba9f67a9f581b48db2d0ce78f37e6.jpg) ---
**Author:** ![RamonDelValle](https://avatars.discourse-cdn.com/v4/letter/r/85e7bf/32.png) [@RamonDelValle](https://community.inventables.com/u/RamonDelValle)\ **Post date:** [June 7, 2016, 8:28pm UTC](https://community.inventables.com/t/rounded-edges/24687/3 "2016-06-07T20:28:54Z")
That’s what I thought but I just wanted to see if there was a way to make this an all x carve project. ---
**Author:** ![BradT](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bradt/32/15411_2.png) [@BradT](https://community.inventables.com/u/BradT)\ **Post date:** [June 7, 2016, 11:59pm UTC](https://community.inventables.com/t/rounded-edges/24687/4 "2016-06-07T23:59:53Z")
I’m not sure you could do that with Easel Now, you could do it VERY easily with fusion 360. It has a bit of a learning curve, but once you get the basics, setting up a box takes no time at all. The holes on the sides will probably need to be done off the X-Carve, but you can get the profile done. ---
**Author:** ![RamonDelValle](https://avatars.discourse-cdn.com/v4/letter/r/85e7bf/32.png) [@RamonDelValle](https://community.inventables.com/u/RamonDelValle)\ **Post date:** [June 8, 2016, 12:42am UTC](https://community.inventables.com/t/rounded-edges/24687/5 "2016-06-08T00:42:00Z")
I’ll check out fusion, thanks!. Just to be clear it’s the rounded edges that I’m worried about, not the shape. ---
**Author:** ![RobertA\_Rieke](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/roberta_rieke/32/32723_2.png) [@RobertA\_Rieke](https://community.inventables.com/u/RobertA_Rieke)\ **Post date:** [June 8, 2016, 1:01am UTC](https://community.inventables.com/t/rounded-edges/24687/6 "2016-06-08T01:01:02Z")
Can be done with fusion, but it’ll be a LOT faster and more accurate to use a router table. You’d have to be dead-on zero with the X-Carve and your measurements, and if you lost steps you’d destroy a perfectly good blank pretty quickly. ---
**Author:** ![BradT](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bradt/32/15411_2.png) [@BradT](https://community.inventables.com/u/BradT)\ **Post date:** [June 8, 2016, 2:09am UTC](https://community.inventables.com/t/rounded-edges/24687/8 "2016-06-08T02:09:06Z")
> [@PhilJohnson](#): > > You can make an offset path and use a round over bit. I guess I should have said that I don’t think it is a native capability of Easel (e.g. it’s not baked into the options). It would be an interesting exercise to see done though. ---
**Author:** ![RamonDelValle](https://avatars.discourse-cdn.com/v4/letter/r/85e7bf/32.png) [@RamonDelValle](https://community.inventables.com/u/RamonDelValle)\ **Post date:** [June 8, 2016, 2:50am UTC](https://community.inventables.com/t/rounded-edges/24687/9 "2016-06-08T02:50:58Z")
So I was going to experiment with the roundover but I can’t find any bits here locally that would fit. So I’m going to call around and see if anyone I know has a routing table. I am curious about using these cutting point roundover bits I saw in a shop bott video. I might order me some and see what happens. ---
**Author:** ![RamonDelValle](https://avatars.discourse-cdn.com/v4/letter/r/85e7bf/32.png) [@RamonDelValle](https://community.inventables.com/u/RamonDelValle)\ **Post date:** [June 8, 2016, 3:02am UTC](https://community.inventables.com/t/rounded-edges/24687/11 "2016-06-08T03:02:33Z")
I just hate that end mills are so hard to find locally. Good thing I have Amazon prime lol