# Round Workpiece

**URL:** <https://community.inventables.com/t/round-workpiece/116682>\
**Category:** Projects\
**Created:** [April 13, 2021, 8:26pm UTC](https://community.inventables.com/t/round-workpiece/116682 "2021-04-13T20:26:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MigelVega](https://avatars.discourse-cdn.com/v4/letter/m/85f322/32.png) [@MigelVega](https://community.inventables.com/u/MigelVega)\
**Post date:** [April 13, 2021, 8:26pm UTC](https://community.inventables.com/t/round-workpiece/116682/1 "2021-04-13T20:26:28Z")

</div>

I’m trying to do a carve in the center of my work piece which is round. How do I start the carve in the center of my workpiece which is 30" round? Thank you in advance for any help!

---

<div class="post-metadata">

**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\
**Post date:** [April 13, 2021, 8:38pm UTC](https://community.inventables.com/t/round-workpiece/116682/2 "2021-04-13T20:38:52Z")

</div>

Highlight your work piece then go up to cut, shape set the work to be in the center then set your x and y position to zero and it should move the piece down to the middle of your work.

 ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/8/f/8f1c316409a312c2d681bbc94246460fa097e210.png)

---

<div class="post-metadata">

**Author:** ![PhillipLunsford](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/philliplunsford/32/33614_2.png) [@PhillipLunsford](https://community.inventables.com/u/PhillipLunsford)\
**Post date:** [April 14, 2021, 12:25am UTC](https://community.inventables.com/t/round-workpiece/116682/3 "2021-04-14T00:25:23Z")

</div>

[![](https://img.youtube.com/vi/jCMm0LmSamQ/maxresdefault.jpg "Let’s Make a Clock") ](https://www.youtube.com/watch?v=jCMm0LmSamQ)

Take a look at this video. I use the center for many of my projects