Roughing Bits

[AllenMassey]

This Angle Iron mod looks really nice

Y axis stiffing mod. Aluminum Angle Iron

Here is my take on a Y axis stiffing mod. this mod is easily reversible and removable. Parts you will need: T-Slot drop in nuts (20 series) at least 10 - the more you have the better Screws to match the nuts. - these dont need to be very long (5mm should do . but measure twice i had to get washers) 1 8ft pice of 2x2 Al angle iron from lowes cut to exact length. Measure, cut, drill, screw, enjoy this instantly made a massive difference with Y movement. even testing movement by hand, you cou…