# RhinoCAM Post Processor

**URL:** <https://community.inventables.com/t/rhinocam-post-processor/42878>\
**Category:** Carvey\
**Created:** [September 29, 2017, 6:43am UTC](https://community.inventables.com/t/rhinocam-post-processor/42878 "2017-09-29T06:43:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rjd](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/rjd/32/67396_2.png) [@rjd](https://community.inventables.com/u/rjd)\
**Post date:** [September 29, 2017, 6:43am UTC](https://community.inventables.com/t/rhinocam-post-processor/42878/1 "2017-09-29T06:43:55Z")

</div>

Is there a RhinoCAM post processor for Carvey?

---

<div class="post-metadata">

**Author:** ![anon68752607](https://avatars.discourse-cdn.com/v4/letter/a/6de8d8/32.png) [@anon68752607](https://community.inventables.com/u/anon68752607)\
**Post date:** [September 29, 2017, 7:00am UTC](https://community.inventables.com/t/rhinocam-post-processor/42878/2 "2017-09-29T07:00:21Z")

</div>

probably the same as the xcarve one

> **[Rhinocam post-processor](https://www.manmademayhem.com/?p=1909)**
>
> Here’s a quickie for people who use Rhinocam. Mecsoft has recently released an X-carve post processor. While this is great, there were 2 features that were missing imo, so I changed their pos…

or use a generic mach3 one