# \[Resolved\] - Squaring X Carriage Front to Back

**URL:** <https://community.inventables.com/t/resolved-squaring-x-carriage-front-to-back/8945>\
**Category:** Troubleshooting\
**Created:** [June 4, 2015, 12:44am UTC](https://community.inventables.com/t/resolved-squaring-x-carriage-front-to-back/8945 "2015-06-04T00:44:00Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![DavidFletcher](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/davidfletcher/32/32729_2.png) [@DavidFletcher](https://community.inventables.com/u/DavidFletcher)\
**Post date:** [June 5, 2015, 3:12am UTC](https://community.inventables.com/t/resolved-squaring-x-carriage-front-to-back/8945/9 "2015-06-05T03:12:38Z")

</div>

OK, I got it all sorted out 😄

I spent yesterday pulling most of the machine apart to get the Y plates off. I was able to enlarge one of the lower Y plate mounting holes which gave me the adjustment I needed to square the front piece of Makerslide.

Re-assembled it and everything is square now.

---

_[View the full topic](https://community.inventables.com/t/resolved-squaring-x-carriage-front-to-back/8945)._