# Relay control box

**URL:** <https://community.inventables.com/t/relay-control-box/31705>\
**Category:** X-Carve\
**Created:** [December 21, 2016, 3:49pm UTC](https://community.inventables.com/t/relay-control-box/31705 "2016-12-21T15:49:12Z")\
**Posts on this page:** 1\
**Showing post:** 32

<div class="post-metadata">

**Author:** ![Durahl](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/durahl/32/82590_2.png) [@Durahl](https://community.inventables.com/u/Durahl)\
**Post date:** [February 24, 2017, 7:37pm UTC](https://community.inventables.com/t/relay-control-box/31705/32 "2017-02-24T19:37:40Z")

</div>

Try the **Spindle (PWM)** Terminal instead of the **Spindle (0-10V)** one.

Not being in the market for the 110V IoT Solution [I had to make my own](https://community.inventables.com/t/spindle-ssr-relay/33058) which didn’t work at first but after 1-2 changes, one of which was hooking it to the **Spindle (PWM)** Terminal, it started working just fine.

---

_[View the full topic](https://community.inventables.com/t/relay-control-box/31705)._