# Project you are most proud of

**URL:** <https://community.inventables.com/t/project-you-are-most-proud-of/25519>\
**Category:** Projects\
**Created:** [June 30, 2016, 1:12pm UTC](https://community.inventables.com/t/project-you-are-most-proud-of/25519 "2016-06-30T13:12:25Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![DylanSquires](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/dylansquires/32/74381_2.png) [@DylanSquires](https://community.inventables.com/u/DylanSquires)\
**Post date:** [June 30, 2016, 5:34pm UTC](https://community.inventables.com/t/project-you-are-most-proud-of/25519/16 "2016-06-30T17:34:25Z")

</div>

I’m proud of this not so much from a machining perspective, although that played a big part, but from a design perspective, it was definitely one of the more complex projects I’ve done, and I feel came out very close to the vision:

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/3/f3457a6db7928ec257cf28a0d8c117697e7a022d.png)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/3/e34541537acb447cbcd08bfdf3f1c25fc0581f36.png)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/6/1/615eb483e47df27f551fd5c2896ba09f22da7a0f.png)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/7/b/7b6a247fd909baf74bc31aaa222bf4ee42e9f352.png)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/2/b2b0e38b823550eac43233a133b164f130d417cb.png)

---

_[View the full topic](https://community.inventables.com/t/project-you-are-most-proud-of/25519)._