# Price Increase and decrease **URL:** \ **Category:** Uncategorized\ **Created:** [July 6, 2016, 10:52pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741 "2016-07-06T22:52:12Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![DesmondBrown](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@DesmondBrown](https://community.inventables.com/u/DesmondBrown)\ **Post date:** [July 6, 2016, 10:52pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/1 "2016-07-06T22:52:12Z")
Why has the price of the X Carve basic kit increased from $770 to $1048? ---
**Author:** ![CoreyMitchell](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/coreymitchell/32/23631_2.png) [@CoreyMitchell](https://community.inventables.com/u/CoreyMitchell)\ **Post date:** [July 6, 2016, 11:49pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/2 "2016-07-06T23:49:54Z")
Good question. I know there has been talks of improvements (one piece x axis and improvement on eccentric nuts) so maybe they’re being implemented or else maybe just a good old fashion price increase. Wonder if @Zach_Kaplan can elaborate? ---
**Author:** ![DesmondBrown](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@DesmondBrown](https://community.inventables.com/u/DesmondBrown)\ **Post date:** [July 7, 2016, 12:02am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/3 "2016-07-07T00:02:22Z")
I was planning on getting a basic kit soon but the $400 increase has pushed me back ---
**Author:** ![DarrylKegg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/darrylkegg/32/84315_2.png) [@DarrylKegg](https://community.inventables.com/u/DarrylKegg)\ **Post date:** [July 7, 2016, 12:20am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/5 "2016-07-07T00:20:41Z")
Looks like the core components kit went up, it was $200 something before IIRC, it’s now $319. Acme is the only screw option now. I _think_ the Nema 23 kit went up, as well as the 1000mm upgrade. I’ll need to find my original invoice. I thought perhaps it just included the XController now, but it’s still the Arduino \ Gshield \ PS. Everything else looks the same. I find my invoice and re-post updates. ---
**Author:** ![DarrylKegg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/darrylkegg/32/84315_2.png) [@DarrylKegg](https://community.inventables.com/u/DarrylKegg)\ **Post date:** [July 7, 2016, 12:26am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/7 "2016-07-07T00:26:26Z")
Ok, so here’s my order from February of this year … Contents: X-Carve® X-Carve 1000mm Rail Kit X-Carve ACME Lead Screw Kit X-Carve NEMA 23 Stepper Motor Kit X-Carve DeWalt 611 Spindle Mount X-Carve Arduino/gShield Motion Controller Kit X-Carve Power Supply Kit X-Carve 1000mm Wiring Kit X-Carve 1000mm Drag Chain Kit X-Carve Limit Switch Kit 1/8" Precision Collet Kit for DeWalt 611 High Speed Steel 2 Flute Upcut Spiral Solid Carbide 2 Flute Spiral Upcut (Ball Nose End) Unit price: $1,150.90 Same configuration on the website today shows a total of $1244.00 plus shipping… So, looks like it went up $93.10. yeah @PhilJohnson - I didn’t see XController on the pick list either. I had to call them to swap out my GShield\Arduino\PS then, since the XController was just released. It upped my price ~$150, but it was **WELL** worth the addition IMHO. Would have thought it’d be in the options by now. ---
**Author:** ![GlennMDutcher](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/glennmdutcher/32/75687_2.png) [@GlennMDutcher](https://community.inventables.com/u/GlennMDutcher)\ **Post date:** [July 7, 2016, 12:33am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/8 "2016-07-07T00:33:32Z")
X-Carve X-Carve 500mm Rail Kit X-Carve ACME Lead Screw Kit X-Carve NEMA 23 Stepper Motor Kit X-Carve DeWalt 611 Spindle Mount X-Carve Arduino/gShield Motion Controller Kit X-Carve Power Supply Kit X-Carve 500mm Wiring Kit Unit price: $699.00 I paid on 11/30/15 Today it would be $875.00 up $175 on mine ---
**Author:** ![DarrylKegg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/darrylkegg/32/84315_2.png) [@DarrylKegg](https://community.inventables.com/u/DarrylKegg)\ **Post date:** [July 7, 2016, 12:46am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/9 "2016-07-07T00:46:12Z")
I wonder what changed, beside price… Maybe the single piece X rail? ---
**Author:** ![DesmondBrown](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@DesmondBrown](https://community.inventables.com/u/DesmondBrown)\ **Post date:** [July 7, 2016, 12:49am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/10 "2016-07-07T00:49:17Z")
All the prices have increased. The power supply used to be $69,Motion Controller $99, Spindle $129, Nema 17 $59 and both Rail kits. ---
**Author:** ![Tmar](https://avatars.discourse-cdn.com/v4/letter/t/e36b37/32.png) [@Tmar](https://community.inventables.com/u/Tmar)\ **Post date:** [July 7, 2016, 2:09pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/11 "2016-07-07T14:09:43Z")
I was also looking at a kit, but being Canadian the conversion rate was hard enough to choke back let alone the price increase. Will definitely be looking at some other options now. ---
**Author:** ![DesmondBrown](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@DesmondBrown](https://community.inventables.com/u/DesmondBrown)\ **Post date:** [July 7, 2016, 2:27pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/12 "2016-07-07T14:27:36Z")
I am looking at Zen Toolworks but not sure it their CNC is as good as X Carve ---
**Author:** ![Zach\_Kaplan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/zach_kaplan/32/84268_2.png) [@Zach\_Kaplan](https://community.inventables.com/u/Zach_Kaplan)\ **Post date:** [July 7, 2016, 10:29pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/13 "2016-07-07T22:29:00Z")
Hey everyone, I’m sorry for the confusion. We have received feedback that our prices are too expensive and too cheap. As you might expect it is a bit confusing to get both kinds of feedback. We are currently running some pricing tests to try and figure out what the right price is. We want to make X-Carve as accessible as possible but at the same time we need to keep the lights on and pay our employees. We’re trying to understand if we lower the price do enough new people buy to justify the lowered price or are we getting the same number of orders. If we raise the price do we lose too many people and it’s not worth the increase. ---
**Author:** ![DesmondBrown](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@DesmondBrown](https://community.inventables.com/u/DesmondBrown)\ **Post date:** [July 7, 2016, 10:54pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/14 "2016-07-07T22:54:54Z")
Understandable. Thanks for the explanation ---
**Author:** ![CurtisCummings](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/curtiscummings/32/51964_2.png) [@CurtisCummings](https://community.inventables.com/u/CurtisCummings)\ **Post date:** [July 7, 2016, 11:17pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/15 "2016-07-07T23:17:18Z")
I imagine the X-Controller is not an option yet because some of us are still on back order. ---
**Author:** ![RonSabourin](https://avatars.discourse-cdn.com/v4/letter/r/a88e57/32.png) [@RonSabourin](https://community.inventables.com/u/RonSabourin)\ **Post date:** [July 7, 2016, 11:25pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/16 "2016-07-07T23:25:17Z")
Thanks Zach. I’m buying the xcarve and xcontroller tomorrow. 😄 Thanks to you and the team for all the great support… I.CAN’T.WAIT.TO.CARVE. 🙂 ---
**Author:** ![Zach\_Kaplan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/zach_kaplan/32/84268_2.png) [@Zach\_Kaplan](https://community.inventables.com/u/Zach_Kaplan)\ **Post date:** [July 7, 2016, 11:45pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/17 "2016-07-07T23:45:11Z")
@CurtisCummings you can order the [X-Controller here](https://www.inventables.com/technologies/x-controller-kit). You might also want to check out [this thread](https://community.inventables.com/t/new-x-carve-on-make-com/24059) if you haven’t yet. ---
**Author:** ![AllenMassey](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/allenmassey/32/84441_2.png) [@AllenMassey](https://community.inventables.com/u/AllenMassey)\ **Post date:** [July 7, 2016, 11:45pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/18 "2016-07-07T23:45:38Z")
When I purchased the Shapeoko 2 500x500, the main reason I purchased it was because it was under $900 all in. I think the total price I paid turned out to be about $700, but I would not have thought twice if the price had been $850. But if the price including shipping had been over $900 I probably would not have pulled out my credit card that night. I guess I just mentally classified it in two categories. 1) was fun project for my son and I to build together. I can spend $250 for a product in that category once or twice a year. 2) was a shop tool, I will spend $500 to $600 on a tool for the workshop every couple years. So it seemed like an easily justified purchase to me at $700 but it would still have been within my mental “buy” range at $850. At $900 I would have needed to worry about the purchase for a few weeks but would most likely convinced myself it was worth it. Over that and I would have dismissed it as overpriced. That reminds me, I think Inventables is missing a big part of the potential market by not emphasizing the family fun of assembly. A few pictures on the website of a dad and his son or daughter sitting at the kitchen table with all the parts laid out would help capture a new group of buyers. I know that was one of the important aspects of buying a well documented kit for me. ---
**Author:** ![CurtisCummings](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/curtiscummings/32/51964_2.png) [@CurtisCummings](https://community.inventables.com/u/CurtisCummings)\ **Post date:** [July 7, 2016, 11:48pm UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/19 "2016-07-07T23:48:10Z")
how long until it ships? ---
**Author:** ![MarcCohen](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/marccohen/32/16524_2.png) [@MarcCohen](https://community.inventables.com/u/MarcCohen)\ **Post date:** [July 8, 2016, 12:09am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/20 "2016-07-08T00:09:21Z")
@ZachKaplan, for those of us on a very limited budget, cheaper is better, if you can achieve it without sacrificing quality (and I understand the effect on the bottom line too). After extensive research, of over a year in the making, my intent is order an Xcarve with the Xcontroller. I am only waiting on the new stiffer X Axis Gantry that I saw on your article at the maker faire in Chicago. No other CNC on the market can match the quality and completeness of the X Carve for its relative size (1000mm X 1000mm). ---
**Author:** ![CurtisCummings](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/curtiscummings/32/51964_2.png) [@CurtisCummings](https://community.inventables.com/u/CurtisCummings)\ **Post date:** [July 8, 2016, 12:09am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/21 "2016-07-08T00:09:50Z")
That was the best part of assembly for me. Pictures of My three year old son with a wrench in his hand “helping dad”. ---
**Author:** ![DarrylKegg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/darrylkegg/32/84315_2.png) [@DarrylKegg](https://community.inventables.com/u/DarrylKegg)\ **Post date:** [July 8, 2016, 12:32am UTC](https://community.inventables.com/t/price-increase-and-decrease/25741/22 "2016-07-08T00:32:53Z")
I’d buy again tomorrow even if the price was $2000, but I love my XCarve… That said, please don’t raise the price to $2000, I plan to buy a 500mm for the wife soon. 😄 [Next page](https://community.inventables.com/t/price-increase-and-decrease/25741.md?page=2)