# Power issues

**URL:** <https://community.inventables.com/t/power-issues/34874>\
**Category:** X-Carve\
**Created:** [March 6, 2017, 2:10am UTC](https://community.inventables.com/t/power-issues/34874 "2017-03-06T02:10:17Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![DerrinMullins](https://avatars.discourse-cdn.com/v4/letter/d/7feea3/32.png) [@DerrinMullins](https://community.inventables.com/u/DerrinMullins)\
**Post date:** [March 6, 2017, 2:10am UTC](https://community.inventables.com/t/power-issues/34874/1 "2017-03-06T02:10:17Z")

</div>

So I started to to carve out a project and the head did nt pick up after I homed it so it cut a strait line in the material so I started over and calibrated and lost power been waiting 8 weeks for my machine I finally get it all set up and now it wont turn on help please

---

<div class="post-metadata">

**Author:** ![DouglasSchafer](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/douglasschafer/32/31025_2.png) [@DouglasSchafer](https://community.inventables.com/u/DouglasSchafer)\
**Post date:** [March 6, 2017, 2:50am UTC](https://community.inventables.com/t/power-issues/34874/2 "2017-03-06T02:50:19Z")

</div>

Sounds dumb but check the e-stop

---

<div class="post-metadata">

**Author:** ![DerrinMullins](https://avatars.discourse-cdn.com/v4/letter/d/7feea3/32.png) [@DerrinMullins](https://community.inventables.com/u/DerrinMullins)\
**Post date:** [March 8, 2017, 3:37am UTC](https://community.inventables.com/t/power-issues/34874/3 "2017-03-08T03:37:13Z")

</div>

I did and still no power

---

<div class="post-metadata">

**Author:** ![DerrinMullins](https://avatars.discourse-cdn.com/v4/letter/d/7feea3/32.png) [@DerrinMullins](https://community.inventables.com/u/DerrinMullins)\
**Post date:** [March 15, 2017, 2:41pm UTC](https://community.inventables.com/t/power-issues/34874/5 "2017-03-15T14:41:56Z")

</div>

the fan was running. they next day aired me a new pcu and everything has been working great

---

<div class="post-metadata">

**Author:** ![Amanda](https://avatars.discourse-cdn.com/v4/letter/a/67e7ee/32.png) [@Amanda](https://community.inventables.com/u/Amanda)\
**Post date:** [September 6, 2017, 5:54pm UTC](https://community.inventables.com/t/power-issues/34874/6 "2017-09-06T17:54:38Z")

</div>

Hey Bob, I cut on mine yesterday, went to cut today and the xcontroller wont power on. My fan isn’t on either.