# Please help on identifying Model **URL:** \ **Category:** For Sale and Trade\ **Created:** [June 22, 2023, 9:49pm UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525 "2023-06-22T21:49:07Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![LauraLopez](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@LauraLopez](https://community.inventables.com/u/LauraLopez)\ **Post date:** [June 22, 2023, 9:49pm UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/1 "2023-06-22T21:49:07Z")
Found a used Inventable at an Everything must go liquidation sale and the Seller knew nothing about it. Does anyone know if this is the old model or the updated model. ![IMG_0760](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/9/b9f427b92bf2e79eb96f8c0ad4eea08bd77e88b2.jpeg) ![IMG_0761](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/2/a/2a9e3a8853d5975c07f14399e5ec9c4282a75d9a.jpeg) ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [June 23, 2023, 12:34am UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/2 "2023-06-23T00:34:18Z")
It is not the old model but not the updated model either. ---
**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\ **Post date:** [June 23, 2023, 7:56pm UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/3 "2023-06-23T19:56:31Z")
this is the pre-nov 2021 X-Carve without any upgrades that came out in Nov 2021. ---
**Author:** ![LauraLopez](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@LauraLopez](https://community.inventables.com/u/LauraLopez)\ **Post date:** [June 30, 2023, 1:48am UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/4 "2023-06-30T01:48:04Z")
What do I need to make if the most current one with the upgrades ? ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [June 30, 2023, 2:07am UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/5 "2023-06-30T02:07:05Z")
Go up to the top where it says shop then click on xcarve upgrades and you will see what all you can get. ---
**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\ **Post date:** [June 30, 2023, 7:15am UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/6 "2023-06-30T07:15:17Z")
This: > **[X-Carve Upgrade Kit](https://www.inventables.com/products/x-carve-upgrade-kit?variant=41037047791673)** > >  Bundle and save with this ultimate X-Carve Upgrade Kit. Increase your X-Carve’s rigidity, torque, and material removal rate—3+ times faster—in just 2 1/2 hours. Reduce chatter and increase accuracy with these rock-solid upgrades to take your... AND if you want the new wasteboard design as well then add This too: > **[1000mm X-Carve Modular Waste Board Kit](https://www.inventables.com/products/1000mm-x-carve-modular-waste-board-kit?variant=41037048053817)** > > The new X-Carve Modular Waste Board Kit provides the best of both worlds when it comes to holding down carving material. Benefits include: Integrated T-Slot tracks allow for countless clamp and hold-down options that have a 5/16" screw diameter... ---
**Author:** ![LauraLopez](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@LauraLopez](https://community.inventables.com/u/LauraLopez)\ **Post date:** [July 16, 2023, 7:28pm UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/7 "2023-07-16T19:28:50Z")
Thank you for the info. Do you recommend I buy the Makita router upgrade as well?? I’ve read a lot about issues on changing the bits out. I’m fixing to check out so please advise if I should buy the Makita router as well. Thank you ---
**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\ **Post date:** [October 14, 2023, 7:29pm UTC](https://community.inventables.com/t/please-help-on-identifying-model/144525/8 "2023-10-14T19:29:45Z")
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.