# Photovcarve post processor

**URL:** <https://community.inventables.com/t/photovcarve-post-processor/11355>\
**Category:** X-Carve\
**Created:** [July 31, 2015, 9:08pm UTC](https://community.inventables.com/t/photovcarve-post-processor/11355 "2015-07-31T21:08:43Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![AaronMatthews](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/aaronmatthews/32/73728_2.png) [@AaronMatthews](https://community.inventables.com/u/AaronMatthews)\
**Post date:** [July 31, 2015, 10:09pm UTC](https://community.inventables.com/t/photovcarve-post-processor/11355/3 "2015-07-31T22:09:38Z")

</div>

If those don’t work try these modified ones  
(Photocarve doesn’t like the ARC variables)  
Continuing the discussion from [X-Carve photo carving](https://community.inventables.com/t/x-carve-photo-carving/10270/37):

> [@X-Carve photo carving](https://community.inventables.com/t/x-carve-photo-carving/10270/37):
>
> Commenting out the ARC variables and commands cleared the error and I was able to use the modified x-carve post processor to generate gcode. It will need to be tested to make sure it works correctly.  
> Here they are if anyone wants them  
> [X\_Carve\_PhotoVCarve\_inch.pp](https://community.inventables.com/uploads/inventables/58523d5a710f9aff587e28e6c16a905e6e169eda43d0.pp) (3.9 KB)  
> [X\_Carve\_PhotoVCarve\_mm.pp](https://community.inventables.com/uploads/inventables/58536545169109c2c935f6c75382fc1be312dab35142.pp) (3.9 KB)

---

_[View the full topic](https://community.inventables.com/t/photovcarve-post-processor/11355)._