# PhotoCarve

**URL:** <https://community.inventables.com/t/photocarve/30253>\
**Category:** X-Carve\
**Created:** [November 19, 2016, 3:08am UTC](https://community.inventables.com/t/photocarve/30253 "2016-11-19T03:08:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RobertCapraun](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/robertcapraun/32/84837_2.png) [@RobertCapraun](https://community.inventables.com/u/RobertCapraun)\
**Post date:** [November 19, 2016, 3:08am UTC](https://community.inventables.com/t/photocarve/30253/1 "2016-11-19T03:08:16Z")

</div>

I have downloaded Vetrics PhotoCarve trial program (I want to try my hand at Lithophane carvings and photo carving in general.) I have processed a sample photo that I want to test carve but when I import the G-code into Easel, I receive errors concerning the Post Processor. I have VCarve desktop and I had to download and install the Easel PP file so I could create G-code with that program. Is there a similar file/process for PhotoCarve? I’ll be checking the Vetric Forums for answers also, but have found that this forum is usually quicker with answers… BTW, I have the 1000mm X-Carve 2.0 with X-Controller.