# Phil's 2.8w Jtech Laser Journey

**URL:** <https://community.inventables.com/t/phils-2-8w-jtech-laser-journey/43814>\
**Category:** Upgrades\
**Created:** [October 16, 2017, 9:31pm UTC](https://community.inventables.com/t/phils-2-8w-jtech-laser-journey/43814 "2017-10-16T21:31:44Z")\
**Posts on this page:** 1\
**Showing post:** 490

<div class="post-metadata">

**Author:** ![LarryM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/larrym/32/51450_2.png) [@LarryM](https://community.inventables.com/u/LarryM)\
**Post date:** [January 5, 2018, 3:36am UTC](https://community.inventables.com/t/phils-2-8w-jtech-laser-journey/43814/490 "2018-01-05T03:36:43Z")

</div>

> [@CarstenDegenhardt](#):
>
> I had a little time and I changed the following settings to match the ones you posted.
> 
> $11, $110-$112, $120-$122 but these were too much, the axis were just jumping around. Lowered the settings back down. At least you gave me an idea with what I can play with next when I have a bit more time again

@CarstenDegenhardt

Moved topic to a [new thread](https://community.inventables.com/t/problems-with-laser-setup/48391).

---

_[View the full topic](https://community.inventables.com/t/phils-2-8w-jtech-laser-journey/43814)._