# Oversize projects

**URL:** <https://community.inventables.com/t/oversize-projects/65524>\
**Category:** Uncategorized\
**Created:** [December 13, 2018, 9:04pm UTC](https://community.inventables.com/t/oversize-projects/65524 "2018-12-13T21:04:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![PaulMelachrinos](https://avatars.discourse-cdn.com/v4/letter/p/dbc845/32.png) [@PaulMelachrinos](https://community.inventables.com/u/PaulMelachrinos)\
**Post date:** [December 13, 2018, 9:04pm UTC](https://community.inventables.com/t/oversize-projects/65524/1 "2018-12-13T21:04:06Z")

</div>

I have an x carve with a 1000mm x 1000 mm work surface. How do I go about carving a board of a 4 ft long hope chest I’m making? Can anyone help a brother out?

---

<div class="post-metadata">

**Author:** ![SamGironda](https://avatars.discourse-cdn.com/v4/letter/s/3ab097/32.png) [@SamGironda](https://community.inventables.com/u/SamGironda)\
**Post date:** [December 13, 2018, 11:50pm UTC](https://community.inventables.com/t/oversize-projects/65524/2 "2018-12-13T23:50:30Z")

</div>

have a look at “tiling”

---

<div class="post-metadata">

**Author:** ![PhillipLunsford](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/philliplunsford/32/33614_2.png) [@PhillipLunsford](https://community.inventables.com/u/PhillipLunsford)\
**Post date:** [December 13, 2018, 11:50pm UTC](https://community.inventables.com/t/oversize-projects/65524/3 "2018-12-13T23:50:56Z")

</div>

Tiling. Here is a video