# One of my personalized room signs

**URL:** <https://community.inventables.com/t/one-of-my-personalized-room-signs/21912>\
**Category:** Projects\
**Created:** [March 31, 2016, 4:37am UTC](https://community.inventables.com/t/one-of-my-personalized-room-signs/21912 "2016-03-31T04:37:48Z")\
**Posts on this page:** 2\
**Page:** 0

<div class="post-metadata">

**Author:** ![RyanBuitenwerf](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/ryanbuitenwerf/32/56064_2.png) [@RyanBuitenwerf](https://community.inventables.com/u/RyanBuitenwerf)\
**Post date:** [April 5, 2016, 7:54pm UTC](https://community.inventables.com/t/one-of-my-personalized-room-signs/21912/2 "2016-04-05T19:54:31Z")

</div>

What program did you use. I didn’t think Easel did two stage. If it does, what do I need to do to get it to work.

---

<div class="post-metadata">

**Author:** ![NAM37](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/nam37/32/67432_2.png) [@NAM37](https://community.inventables.com/u/NAM37)\
**Post date:** [April 5, 2016, 8:01pm UTC](https://community.inventables.com/t/one-of-my-personalized-room-signs/21912/3 "2016-04-05T20:01:07Z")

</div>

> [@RyanBuitenwerf](#):
>
> I didn’t think Easel did two stage.

Look here:

> [@Two stage cuts](https://community.inventables.com/t/two-stage-cuts/869):
>
> I couldn’t find this in the UI. Using other CAM systems it would set up to first do a rough cut with a large bit, and then go back and fix the detail with a small bit. Like if you are cutting a pocket with sharp inside corners, you would want to use a [really small bit](https://spetools.com/?ref=SALE) to get those corners, but not to cut out the whole pocket. So is there a way to do a rough cut followed by a detailed cut, or is this on the feature roadmap?