# Not carving as deep on the right side

**URL:** <https://community.inventables.com/t/not-carving-as-deep-on-the-right-side/95400>\
**Category:** X-Carve\
**Created:** [July 8, 2020, 4:43pm UTC](https://community.inventables.com/t/not-carving-as-deep-on-the-right-side/95400 "2020-07-08T16:43:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![KennethRSlater](https://avatars.discourse-cdn.com/v4/letter/k/35a633/32.png) [@KennethRSlater](https://community.inventables.com/u/KennethRSlater)\
**Post date:** [July 8, 2020, 4:43pm UTC](https://community.inventables.com/t/not-carving-as-deep-on-the-right-side/95400/1 "2020-07-08T16:43:11Z")

</div>

I have done a couple of signs and I noticed that it doesn’t carve as deep on the right side of my work. It’s all level double checked it. anyone else having this issue?

---

<div class="post-metadata">

**Author:** ![PhillipLunsford](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/philliplunsford/32/33614_2.png) [@PhillipLunsford](https://community.inventables.com/u/PhillipLunsford)\
**Post date:** [July 8, 2020, 7:05pm UTC](https://community.inventables.com/t/not-carving-as-deep-on-the-right-side/95400/2 "2020-07-08T19:05:10Z")

</div>

It may be level to the floor, but it it parallel to the gantry. That’s the important part. I am going to guess that it if lower on the right side. A better way to say it is maybe the gantry is high on the right side. Check it out. If it is a small amount, you can skim your waste board and solve the problem.