# New user, where are instructions?

**URL:** <https://community.inventables.com/t/new-user-where-are-instructions/124711>\
**Category:** Uncategorized\
**Created:** [November 13, 2021, 7:31pm UTC](https://community.inventables.com/t/new-user-where-are-instructions/124711 "2021-11-13T19:31:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![MatthewConklin](https://avatars.discourse-cdn.com/v4/letter/m/e5b9ba/32.png) [@MatthewConklin](https://community.inventables.com/u/MatthewConklin)\
**Post date:** [November 13, 2021, 7:31pm UTC](https://community.inventables.com/t/new-user-where-are-instructions/124711/1 "2021-11-13T19:31:42Z")

</div>

I just received my X-Carve and there are no instructions?? Where do I find them? This is disappointing that I don’t know where or how to put this together with no instructions

---

<div class="post-metadata">

**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\
**Post date:** [November 13, 2021, 8:26pm UTC](https://community.inventables.com/t/new-user-where-are-instructions/124711/2 "2021-11-13T20:26:19Z")

</div>

> **[X-Carve Instructions: x-carve-instructions](https://x-carve-instructions.inventables.com/)**
>
> X-Carve Instructions

---

<div class="post-metadata">

**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\
**Post date:** [November 15, 2021, 6:07pm UTC](https://community.inventables.com/t/new-user-where-are-instructions/124711/3 "2021-11-15T18:07:27Z")

</div>

> [@MatthewConklin](#):
>
> I don’t know where or how to put this together with no instructions

I don’t think anyone could put the XCarve together without instructions…well maybe @SethCNC 😬

---

<div class="post-metadata">

**Author:** ![WillieFields](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/williefields/32/49220_2.png) [@WillieFields](https://community.inventables.com/u/WillieFields)\
**Post date:** [November 19, 2021, 7:08pm UTC](https://community.inventables.com/t/new-user-where-are-instructions/124711/4 "2021-11-19T19:08:32Z")

</div>

[![](https://img.youtube.com/vi/xJh1pMIxqJ4/maxresdefault.jpg "New X Carve 750 mm CNC Assembly - Part 1") ](https://www.youtube.com/watch?v=xJh1pMIxqJ4)

These are some of the best instructional videos for x carve assembly

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [February 17, 2022, 7:09pm UTC](https://community.inventables.com/t/new-user-where-are-instructions/124711/5 "2022-02-17T19:09:14Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.