# New Triquetra Tool Box Software coming soon **URL:** \ **Category:** Products\ **Created:** [October 15, 2016, 7:13pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948 "2016-10-15T19:13:34Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 15, 2016, 7:13pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/1 "2016-10-15T19:13:34Z")
I have been working tirelessly on a new software package for the Triquetra Auto Zero Touch Plate. It is still in Beta Testing for now but should be released in the very near future. Here is a teaser video: I’m looking for a Beta Tester that runs Windows XP, Windows, Vista, Windows 7 and Windows 10. Charley Triquetrta CNC ---
**Author:** ![RonSabourin](https://avatars.discourse-cdn.com/v4/letter/r/a88e57/32.png) [@RonSabourin](https://community.inventables.com/u/RonSabourin)\ **Post date:** [October 15, 2016, 7:22pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/2 "2016-10-15T19:22:59Z")
Looks good Charley… you may just get my money yet!!! 🙂 ---
**Author:** ![StephenCook](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/stephencook/32/73911_2.png) [@StephenCook](https://community.inventables.com/u/StephenCook)\ **Post date:** [October 16, 2016, 3:43am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/3 "2016-10-16T03:43:03Z")
Charley I haven’t had a good run with the software. I am going to see if I can work with it tomorrow. I have a few things I have to do for clients. I did notice that my Z axis is out of tolerance. I will fix that then do some more testing and get you a report. Sorry for any delay. I only get weekends to work with the Xcarve till I get a house. I am working hard on that. ---
**Author:** ![CurtisCummings](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/curtiscummings/32/51964_2.png) [@CurtisCummings](https://community.inventables.com/u/CurtisCummings)\ **Post date:** [October 16, 2016, 4:33am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/4 "2016-10-16T04:33:26Z")
Very nice ---
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 16, 2016, 4:53am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/5 "2016-10-16T04:53:19Z")
Thanks Stephen, I have upgraded your Triquetra User Page access. On the website look under the Triquetra User Page link and there is a new link added for Beta Testers. You can use that to access the files for the program and leave your comments. Thanks for the help you have already given. Charley ---
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 16, 2016, 4:53am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/6 "2016-10-16T04:53:53Z")
Thanks Curtis, I am really trying to make the Triquetra better than ever. Charley ---
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 16, 2016, 3:02pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/8 "2016-10-16T15:02:41Z")
I hate when I do that!!! ---
**Author:** ![StephenCook](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/stephencook/32/73911_2.png) [@StephenCook](https://community.inventables.com/u/StephenCook)\ **Post date:** [October 16, 2016, 11:10pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/9 "2016-10-16T23:10:33Z")
Well my Gshield just went bad. The Z axis is making grinding noises. I switched from the X to the Z with the steppers and I get the same thing. I am going to be down for a while till I can fix it. ---
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 16, 2016, 11:44pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/10 "2016-10-16T23:44:33Z")
I feel your pain brother!!! My Shop PC just died today. Went to power it up and all I got was very faint beeps from the pc. Working on saddling up another pc now!! (That’s what we do here in Texas) ---
**Author:** ![MarcCohen](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/marccohen/32/16524_2.png) [@MarcCohen](https://community.inventables.com/u/MarcCohen)\ **Post date:** [October 17, 2016, 2:30pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/11 "2016-10-17T14:30:01Z")
Having already tested your new software, in my humble opinion, it will be hard for you to make it any better! ---
**Author:** ![MRoss](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/mross/32/68103_2.png) [@MRoss](https://community.inventables.com/u/MRoss)\ **Post date:** [October 17, 2016, 10:59pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/12 "2016-10-17T22:59:00Z")
I like the look of the new layout, Looks much cleaner. ---
**Author:** ![CurtisCummings](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/curtiscummings/32/51964_2.png) [@CurtisCummings](https://community.inventables.com/u/CurtisCummings)\ **Post date:** [October 18, 2016, 2:43am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/13 "2016-10-18T02:43:44Z")
Sounds awesome. When will this be ready? ---
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 20, 2016, 5:33pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/14 "2016-10-20T17:33:29Z")
> [@MarcCohen](#): > > Having already tested your new software, in my humble opinion, it will be hard for you to make it any better! Oh but I have!!! Video to be uploaded as soon as I fix another typo. Darn it!!! ---
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 20, 2016, 5:59pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/15 "2016-10-20T17:59:16Z")
> [@CharleyThomas](#): > > Video to be uploaded as soon as I fix another typo. Darn it!!! Here it is [![](https://img.youtube.com/vi/JfmG6p7nbdY/maxresdefault.jpg "Triquetra Pre Release Overview") ](https://www.youtube.com/watch?v=JfmG6p7nbdY) ---
**Author:** ![RonSabourin](https://avatars.discourse-cdn.com/v4/letter/r/a88e57/32.png) [@RonSabourin](https://community.inventables.com/u/RonSabourin)\ **Post date:** [October 20, 2016, 6:02pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/16 "2016-10-20T18:02:26Z")
Looks good Charley!! ---
**Author:** ![JohnChamplain](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/johnchamplain/32/75884_2.png) [@JohnChamplain](https://community.inventables.com/u/JohnChamplain)\ **Post date:** [October 20, 2016, 6:03pm UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/17 "2016-10-20T18:03:30Z")
Congratulations, Charley. Very nicely done. John ---
**Author:** ![MRoss](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/mross/32/68103_2.png) [@MRoss](https://community.inventables.com/u/MRoss)\ **Post date:** [October 21, 2016, 12:45am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/18 "2016-10-21T00:45:23Z")
Having some problems. I use UGS and Vcarve. I have tried homing then use the Triquera and sequence works fine. Then load file to cut and router heads and smashes z switch, I have also tried zeroing the X,Y,Z at the corner of work and the loading the Triquetra sequence with the same results when loading the cutting file. I have got it to work somtimes but I don’t know what I do different when it works, I should video my life and play it back maybe 😀 ---
**Author:** ![MRoss](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/mross/32/68103_2.png) [@MRoss](https://community.inventables.com/u/MRoss)\ **Post date:** [October 21, 2016, 2:18am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/19 "2016-10-21T02:18:51Z")
Here is the Triquetra txt file ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/2/a/2a4f804b2a289514b836751a3d5b52b389b44051.png) ---
**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\ **Post date:** [October 21, 2016, 3:11am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/20 "2016-10-21T03:11:04Z")
The file is correct. The only thing you are doing that I don’t is homing. Perhaps you should give it a try without homing your machine. There is nothing in the file that would cause what you are describing. Once the file has run and ended it is finished. Your machine is not waiting for any more input from it. With Aspire there is a post processor configuration file that is loaded that sets the parameters for the X Carve. Since V-Carve and Aspire are made by Vetric there may be on for it as well. The Aspire file is on the Inventables web site for download. You aren’t hitting the Return to Zero button in UGS are you. That will do what you are describing after running the zeroing g-code. That button sends you spindle to Machine position zero. The auto zero code sets Work Position Zero. My first thought is to try it without homing though. ---
**Author:** ![MRoss](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/mross/32/68103_2.png) [@MRoss](https://community.inventables.com/u/MRoss)\ **Post date:** [October 21, 2016, 3:32am UTC](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948/21 "2016-10-21T03:32:35Z")
I am using the xcarve vcarve post processor. No I am no hitting the return to zero. Will try without homing. Also I just move machine to close to my 0,0,0 position on work piece reset my x, y, Z and post processor works fine. [Next page](https://community.inventables.com/t/new-triquetra-tool-box-software-coming-soon/28948.md?page=2)