# My New Cross-Cut Sled

**URL:** https://community.inventables.com/t/my-new-cross-cut-sled/38806
**Category:** Uncategorized
**Created:** [June 15, 2017, 2:01am UTC](https://community.inventables.com/t/my-new-cross-cut-sled/38806 "2017-06-15T02:01:10Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Gary3](https://avatars.discourse-cdn.com/v4/letter/g/bcef8e/32.png) [@Gary3](https://community.inventables.com/u/Gary3)
#### Post date: [June 15, 2017, 2:01am UTC](https://community.inventables.com/t/my-new-cross-cut-sled/38806/1 "2017-06-15T02:01:10Z")

</div>

What you guys think?

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/3/c/3c933091c1467c4191cc0c179f9495161a845301.jpg)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/5/55eb4a0f902760d13857a3cfc043f8b56b35c3c4.jpg)

---

<div class="post-metadata">

### Author: ![JeremySimmons](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jeremysimmons/32/68212_2.png) [@JeremySimmons](https://community.inventables.com/u/JeremySimmons)
#### Post date: [June 15, 2017, 2:06am UTC](https://community.inventables.com/t/my-new-cross-cut-sled/38806/2 "2017-06-15T02:06:31Z")

</div>

Overhang on right side of bottom photo… otherwise snazzy.

---

<div class="post-metadata">

### Author: ![Gary3](https://avatars.discourse-cdn.com/v4/letter/g/bcef8e/32.png) [@Gary3](https://community.inventables.com/u/Gary3)
#### Post date: [June 15, 2017, 2:18am UTC](https://community.inventables.com/t/my-new-cross-cut-sled/38806/3 "2017-06-15T02:18:17Z")

</div>

i was just gonna trim it off.

---

<div class="post-metadata">

### Author: ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)
#### Post date: [June 15, 2017, 2:23am UTC](https://community.inventables.com/t/my-new-cross-cut-sled/38806/4 "2017-06-15T02:23:12Z")

</div>

looks nice.

---

<div class="post-metadata">

### Author: ![StephenCook](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/stephencook/32/73911_2.png) [@StephenCook](https://community.inventables.com/u/StephenCook)
#### Post date: [June 16, 2017, 9:53pm UTC](https://community.inventables.com/t/my-new-cross-cut-sled/38806/6 "2017-06-16T21:53:24Z")

</div>

Looks pretty good but keeping things square will take more effort.  
I want to make this one.

> **[Table Saw Cross Cut & Miter Sled Plans](https://nickferry.com/product/table-saw-cross-cut-miter-sled/)**
>
> 23 pages of high quality, full color step by step PDF plans for the cross cut / miter sled combo I made in episode 58.  All downloadable products are non-refundable.  On checkout receipt you will b…