# My cut is jumping bad

**URL:** https://community.inventables.com/t/my-cut-is-jumping-bad/94024
**Category:** Uncategorized
**Created:** [June 14, 2020, 8:42pm UTC](https://community.inventables.com/t/my-cut-is-jumping-bad/94024 "2020-06-14T20:42:25Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![RamziKhairallah](https://avatars.discourse-cdn.com/v4/letter/r/eb9ed0/32.png) [@RamziKhairallah](https://community.inventables.com/u/RamziKhairallah)
#### Post date: [June 14, 2020, 8:42pm UTC](https://community.inventables.com/t/my-cut-is-jumping-bad/94024/1 "2020-06-14T20:42:25Z")

</div>



---

<div class="post-metadata">

### Author: ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)
#### Post date: [June 15, 2020, 6:47am UTC](https://community.inventables.com/t/my-cut-is-jumping-bad/94024/2 "2020-06-15T06:47:09Z")

</div>

Something is loose or cutting forces are way too large.

---

<div class="post-metadata">

### Author: ![CollinGoehring](https://avatars.discourse-cdn.com/v4/letter/c/839c29/32.png) [@CollinGoehring](https://community.inventables.com/u/CollinGoehring)
#### Post date: [June 15, 2020, 11:07am UTC](https://community.inventables.com/t/my-cut-is-jumping-bad/94024/3 "2020-06-15T11:07:55Z")

</div>

Make sure the spindle carriage is attached tightly with the screws and the V-Wheels on the Z-Axis are just tight enough so the fixed wheels are also snug against the rail. That was my issue for the chattering. They came loose first run due to vibration. Havent had a problem since.

 ![spindle](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/8/5844d96cf42a0c9d663678ceb3650b85162226d3.jpeg)  
 ![vwheels](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/f/5f374afa183cc7aa12ffc4fb4f2e495c64e21499.jpeg)