# Multiple depth carve

**URL:** <https://community.inventables.com/t/multiple-depth-carve/88527>\
**Category:** X-Carve\
**Created:** [March 26, 2020, 12:24am UTC](https://community.inventables.com/t/multiple-depth-carve/88527 "2020-03-26T00:24:37Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![BrandonR\_Parker](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandonr_parker/32/13853_2.png) [@BrandonR\_Parker](https://community.inventables.com/u/BrandonR_Parker)\
**Post date:** [March 26, 2020, 12:40am UTC](https://community.inventables.com/t/multiple-depth-carve/88527/2 "2020-03-26T00:40:03Z")

</div>

Do you have the X-Controller? If you do, you should open it up and check the Dip Switches for each axis. Dip Switch 4 should be set to the OFF (Down if viewed with numbers on bottom or left in the image as shown) position as shown in the image below.

 ![Capture](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/5/95c12aed5f49db79923b93dc7dd176f7ec744dd8.png)

You will also need to ensure that parameter $1 in the GRBL settings is set to 255.

![Capture](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/a/0/a0175e6afd400300058fa92b5364142719cefdb4.png)

{:0)

Brandon Parker

---

_[View the full topic](https://community.inventables.com/t/multiple-depth-carve/88527)._