# Moving up X-carve

**URL:** <https://community.inventables.com/t/moving-up-x-carve/16653>\
**Category:** Upgrades\
**Created:** [November 30, 2015, 11:08pm UTC](https://community.inventables.com/t/moving-up-x-carve/16653 "2015-11-30T23:08:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hugo](https://avatars.discourse-cdn.com/v4/letter/h/b38774/32.png) [@Hugo](https://community.inventables.com/u/Hugo)\
**Post date:** [November 30, 2015, 11:08pm UTC](https://community.inventables.com/t/moving-up-x-carve/16653/1 "2015-11-30T23:08:14Z")

</div>

Hi there. On first i want need to apologise for my english and say hello everyone’s 🙂 My idea is to milling some Dibond Sheet like 90 cm height / 200cm long and put them from the right side, milling first part, move that sheet and milling rest of project part and i need to move up my x-carve about 2,5 cm. I wana make longer MakerSlide End Plate like in this topic [Tall Y axis end plates](https://community.inventables.com/t/tall-y-axis-end-plates/8686) . My question is. How deep i can set z-axis? and i lose much more rigidy ( i buy some Kress 1050 spindle and make new mount spindle plate ).

---

<div class="post-metadata">

**Author:** ![DavidSohlstrom](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/davidsohlstrom/32/77077_2.png) [@DavidSohlstrom](https://community.inventables.com/u/DavidSohlstrom)\
**Post date:** [December 1, 2015, 12:27am UTC](https://community.inventables.com/t/moving-up-x-carve/16653/2 "2015-12-01T00:27:00Z")

</div>

Hugo  
A standard X-Carve has a work area of X 80 cm Y 80 cm and Z 67 mm. All can be extended to meet your needs.

I sell a set of Y axis end plates that move the Z axis up 5 cm. Send me a private message if you are interested and for pricing.

Dave  
Ariel, WA

PS where are you located in the world.

---

<div class="post-metadata">

**Author:** ![Hugo](https://avatars.discourse-cdn.com/v4/letter/h/b38774/32.png) [@Hugo](https://community.inventables.com/u/Hugo)\
**Post date:** [December 1, 2015, 9:43am UTC](https://community.inventables.com/t/moving-up-x-carve/16653/4 "2015-12-01T09:43:10Z")

</div>

THX for reply David. Im from Poland. And i can make that Y axis end plates on laser 🙂