# Microstepper adjustment

**URL:** <https://community.inventables.com/t/microstepper-adjustment/69662>\
**Category:** X-Carve\
**Created:** [March 1, 2019, 11:40pm UTC](https://community.inventables.com/t/microstepper-adjustment/69662 "2019-03-01T23:40:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![EdLondo](https://avatars.discourse-cdn.com/v4/letter/e/5fc32e/32.png) [@EdLondo](https://community.inventables.com/u/EdLondo)\
**Post date:** [March 1, 2019, 11:40pm UTC](https://community.inventables.com/t/microstepper-adjustment/69662/1 "2019-03-01T23:40:57Z")

</div>

put a cnc for newbies z axis upgrade because th stock z was noisy going up and down put the new one on and same noisy motor up and down did a search and it was suggested to change z axis to 1/8 microstepping and $102 setting x4 of current setting, was 50.059 to 200.236. This quieted the movement of the z axis to the same level as the x and y… Also did a measurement and the z axis moves 10 mm when set for 10 mm. will this change cause any issues. Thanks Ed