I used one of these on the X-Carve’s X axis for half a year, then moved it to a new machine. The added weight (compared to stock) works nicely as a counterweight too (especially if you have a direct drive Z which turns your X-Carriage front-heavy). It’s not that heavier than the StepperOnline 269oz.in (1.05 vs 1.2kg).
It was included in this list.
Higher torque NEMA 23 on the X (was originally 140oz.in) to match the 2x 140oz.in on the Y. I settled with a 345oz.in one which is still within the X-Controllers range (3.0A).