# Make a zero and corner/edge finding tool using the X-Carve

**URL:** <https://community.inventables.com/t/make-a-zero-and-corner-edge-finding-tool-using-the-x-carve/17150>\
**Category:** Upgrades\
**Created:** [December 10, 2015, 6:40pm UTC](https://community.inventables.com/t/make-a-zero-and-corner-edge-finding-tool-using-the-x-carve/17150 "2015-12-10T18:40:54Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![CharleyThomas](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/charleythomas/32/86529_2.png) [@CharleyThomas](https://community.inventables.com/u/CharleyThomas)\
**Post date:** [March 5, 2016, 2:25pm UTC](https://community.inventables.com/t/make-a-zero-and-corner-edge-finding-tool-using-the-x-carve/17150/11 "2016-03-05T14:25:11Z")

</div>

> [@MartinBarfoed](#):
>
> Have you posted the program where folks can find it?

[Auto Zero all 3 axis at one time - #44 by CharleyThomas](https://community.inventables.com/t/auto-zero-all-3-axis-at-one-time/20534/44) is a link to the post with the latest version as of 3/5/16 to the spreadsheet that generates the g-code.

There are videos in the that topic that explain in detail how to use it and show actual usage. Let me know if you have any questions.

Charley

---

_[View the full topic](https://community.inventables.com/t/make-a-zero-and-corner-edge-finding-tool-using-the-x-carve/17150)._