# Machine moving in wrong direction

**URL:** <https://community.inventables.com/t/machine-moving-in-wrong-direction/134479>\
**Category:** Uncategorized\
**Created:** [August 24, 2022, 8:43am UTC](https://community.inventables.com/t/machine-moving-in-wrong-direction/134479 "2022-08-24T08:43:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarkLewin](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/marklewin/32/81201_2.png) [@MarkLewin](https://community.inventables.com/u/MarkLewin)\
**Post date:** [August 24, 2022, 8:43am UTC](https://community.inventables.com/t/machine-moving-in-wrong-direction/134479/1 "2022-08-24T08:43:20Z")

</div>

I was in the middle of a carve all going well. When all of a sudden the machine moved all the way to the front and smacked in to the front gantry. Turned the machine off and reset everything pressed carve and now the machine shoots forward away from the workpiece

---

<div class="post-metadata">

**Author:** ![JohnathanBranson](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/johnathanbranson/32/81111_2.png) [@JohnathanBranson](https://community.inventables.com/u/JohnathanBranson)\
**Post date:** [August 24, 2022, 11:40am UTC](https://community.inventables.com/t/machine-moving-in-wrong-direction/134479/2 "2022-08-24T11:40:56Z")

</div>

Look at my reply on your other comment about this. Also, can you share the project here?

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [November 22, 2022, 11:41am UTC](https://community.inventables.com/t/machine-moving-in-wrong-direction/134479/3 "2022-11-22T11:41:35Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.