Mach 3 software (GCode Line limit)

[HaldorLonningdal]

@SkipEvans

If I am looking for more than what I need, please let me know. There is no sense in spending money that I do not need to.

VTransfer might be something to check out:

VCARVE - EASEL Clarifications Needed

The latest versions of Vectric’s VCarve, Cut2D and Aspire (v9.5xx and later) all include an optional gcode sender called VTransfer, which you can select when you first install the product. This is a deliberately minimal app, but provides basic connection, homing, jogging, origin set-up and, of course, toolpath streaming to your X-Carve. It works best if you are running VCarve on the same machine that your X-Carve is connected to because then you can use the Output direct to machine option when …

The most common Gcode senders used by people here on this forum is:

• Easel (which can also import gcode from other design suites matched with the proper post processor, aka “translator” between design and machine)
• Universal Gcode Sender, UGS for short (also require a matched post processor)