# Lightburn1.1f or change 1.1g

**URL:** <https://community.inventables.com/t/lightburn1-1f-or-change-1-1g/121417>\
**Category:** Uncategorized\
**Created:** [August 22, 2021, 12:19pm UTC](https://community.inventables.com/t/lightburn1-1f-or-change-1-1g/121417 "2021-08-22T12:19:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![berserker](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/berserker/32/87908_2.png) [@berserker](https://community.inventables.com/u/berserker)\
**Post date:** [August 22, 2021, 12:19pm UTC](https://community.inventables.com/t/lightburn1-1f-or-change-1-1g/121417/1 "2021-08-22T12:19:26Z")

</div>

Should I be installing grbl 1.1f to work with lightburn & J-Tech laser ? I have 1.1g installed but cant get the laser to work ! I Have noticed that $31=1 & $32=0 in my existing grbl 1.1g ! or should I just change these to $31=1000 & $32=1 in 1.1g ? Also do I change this in ugs ? I am using Aspire & ugs for the CNC & it is working well I am a bit nervous about changing grbl settings ! I thought 1.1g was good for the laser as well.  
Many thanks G
