# Keyhole Generator Issue **URL:** \ **Category:** X-Carve\ **Created:** [September 10, 2020, 7:41pm UTC](https://community.inventables.com/t/keyhole-generator-issue/99509 "2020-09-10T19:41:26Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![BrianKershaw](https://avatars.discourse-cdn.com/v4/letter/b/f19dbf/32.png) [@BrianKershaw](https://community.inventables.com/u/BrianKershaw)\ **Post date:** [September 10, 2020, 7:41pm UTC](https://community.inventables.com/t/keyhole-generator-issue/99509/1 "2020-09-10T19:41:26Z")
When using the keyhole generator I’m getting inconsistent results. Sometimes it works correctly. Sometimes it goes on an angle. I haven’t made any adjustments. The wood is secure and is not moving during the carve. Any idea what I’m doing wrong? ![IMG_9612](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/6/4/64a5dc369c51b692b1f90b603274be84587c7c4b.jpeg) ---
**Author:** ![BrandonR\_Parker](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandonr_parker/32/13853_2.png) [@BrandonR\_Parker](https://community.inventables.com/u/BrandonR_Parker)\ **Post date:** [September 11, 2020, 4:15pm UTC](https://community.inventables.com/t/keyhole-generator-issue/99509/2 "2020-09-11T16:15:02Z")
It looks like the machine is loosing steps. What are the feeds/speeds? You might have to slow them down … {:0) Brandon Parker ---
**Author:** ![BrianKershaw](https://avatars.discourse-cdn.com/v4/letter/b/f19dbf/32.png) [@BrianKershaw](https://community.inventables.com/u/BrianKershaw)\ **Post date:** [September 14, 2020, 1:46pm UTC](https://community.inventables.com/t/keyhole-generator-issue/99509/3 "2020-09-14T13:46:56Z")
Hi, Thank you for your feedback. I didn’t intentionally change any of the settings, but maybe I mistakenly mixed something up. Deleting the original file and creating a new one seemed to work!