# Key hole bit tool path **URL:** \ **Category:** Projects\ **Created:** [March 3, 2016, 7:42pm UTC](https://community.inventables.com/t/key-hole-bit-tool-path/20888 "2016-03-03T19:42:45Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Rusty](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/rusty/32/72583_2.png) [@Rusty](https://community.inventables.com/u/Rusty)\ **Post date:** [March 3, 2016, 7:49pm UTC](https://community.inventables.com/t/key-hole-bit-tool-path/20888/3 "2016-03-03T19:49:53Z")
Yay! Found it! > [@Keyhole Slot G Code](https://community.inventables.com/t/keyhole-slot-g-code/15616): > > Don’t know if this will be helpful, but I searched all over for a way to cut t-hole slots for hanging pictures and frames. It needs to plunge to a quarter of an inch, and then nibble forward, back up, nibble forward, back up, etc. This is if you don’t want the hassle of first cutting a quarter inch pocket, then following up with the keyhole bit. This code is for 1/8" depth of cut slot cutters. The bottom of the cut is only .25" deep so this is safe for .5" material. This code slows the plun… --- _[View the full topic](https://community.inventables.com/t/key-hole-bit-tool-path/20888)._