# It's Alive **URL:** \ **Category:** Projects\ **Created:** [July 11, 2015, 4:58pm UTC](https://community.inventables.com/t/its-alive/10540 "2015-07-11T16:58:21Z")\ **Posts on this page:** 1\ **Showing post:** 726
**Author:** ![ErikJenkins](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/erikjenkins/32/84368_2.png) [@ErikJenkins](https://community.inventables.com/u/ErikJenkins)\ **Post date:** [July 4, 2016, 4:59pm UTC](https://community.inventables.com/t/its-alive/10540/726 "2016-07-04T16:59:44Z")
Looks like there is one in the forums: > [@Keyhole Slot G Code](https://community.inventables.com/t/keyhole-slot-g-code/15616): > > Don’t know if this will be helpful, but I searched all over for a way to cut t-hole slots for hanging pictures and frames. It needs to plunge to a quarter of an inch, and then nibble forward, back up, nibble forward, back up, etc. This is if you don’t want the hassle of first cutting a quarter inch pocket, then following up with the keyhole bit. This code is for 1/8" depth of cut slot cutters. The bottom of the cut is only .25" deep so this is safe for .5" material. This code slows the plun… --- _[View the full topic](https://community.inventables.com/t/its-alive/10540)._