# Issue When stopping

**URL:** <https://community.inventables.com/t/issue-when-stopping/72080>\
**Category:** X-Carve\
**Created:** [April 21, 2019, 12:51pm UTC](https://community.inventables.com/t/issue-when-stopping/72080 "2019-04-21T12:51:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![KyleWise](https://avatars.discourse-cdn.com/v4/letter/k/c5a1d2/32.png) [@KyleWise](https://community.inventables.com/u/KyleWise)\
**Post date:** [April 21, 2019, 12:51pm UTC](https://community.inventables.com/t/issue-when-stopping/72080/1 "2019-04-21T12:51:07Z")

</div>

I started to have an issue when I stop a carve that is running, the carve button changes to machine stopping and the how did it turn out dialog box appears but the machine never goes back to the start position and the carve button just says machine stopping. I have to close my browser and reopen to get the machine to work again. This is really an issue because I am stopping the carve to make a minor adjustment and I want to use the previous home position but it gets lost when the machine does not return home. It is not every single time. It might work 5 times in a row and then the 6th just leaves me hanging. I am using the IOT relay and another relay to control the spindle and vacuum. Anyone experience this or have any thoughts.

---

<div class="post-metadata">

**Author:** ![JessieFritz](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jessiefritz/32/68787_2.png) [@JessieFritz](https://community.inventables.com/u/JessieFritz)\
**Post date:** [April 22, 2019, 2:23pm UTC](https://community.inventables.com/t/issue-when-stopping/72080/2 "2019-04-22T14:23:32Z")

</div>

Hi @KyleWise - If you haven’t already and you’re still having issues, p[lease reach out to our Customer Success team](https://inventables.zendesk.com/hc/en-us)!