# Inventables - X-Controller \*\*\*Sold\*\*\* **URL:** \ **Category:** For Sale and Trade\ **Created:** [November 26, 2018, 6:07pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556 "2018-11-26T18:07:21Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![GregBara](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@GregBara](https://community.inventables.com/u/GregBara)\ **Post date:** [November 26, 2018, 6:07pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/1 "2018-11-26T18:07:21Z")
I have a very lightly used X-Controller. It was purchased 10/11/18. It is completely built and ready to use. I can provide pictures, but I assure you its in excellent condition, like new. $250 shipped. ![s-l1600 (1)](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/8/0/8085a3367461516b5b501a000d569e6f1196ddc2.jpg) ![s-l1600](https://yyz1.discourse-cdn.com/flex009/images/transparent.png) ![s-l1600 (2)](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/d/1d9ccf4000a63a392b702b756df1d6e891a1fc12.jpg) ![s-l1600 (3)](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/4/7/47025fbd4c4a3ec56cbbbd71e63c68422c22912f.jpg) ---
**Author:** ![BrandonR\_Parker](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandonr_parker/32/13853_2.png) [@BrandonR\_Parker](https://community.inventables.com/u/BrandonR_Parker)\ **Post date:** [November 27, 2018, 5:04pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/2 "2018-11-27T17:04:05Z")
Any specific reason you are parting with it? {:0) Brandon R. Parker ---
**Author:** ![GregBara](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@GregBara](https://community.inventables.com/u/GregBara)\ **Post date:** [November 27, 2018, 5:24pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/3 "2018-11-27T17:24:08Z")
I really wanted to get away from GRBL, and goto a software/hardware package that had built in probing macros for a while. With my luck, a week after receiving this I learned of a new controller out there that had all of what I was looking for. ---
**Author:** ![Pyrex](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/pyrex/32/67259_2.png) [@Pyrex](https://community.inventables.com/u/Pyrex)\ **Post date:** [November 27, 2018, 6:22pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/4 "2018-11-27T18:22:41Z")
what did you end up going with? Curious. ---
**Author:** ![GregBara](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@GregBara](https://community.inventables.com/u/GregBara)\ **Post date:** [November 27, 2018, 7:36pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/5 "2018-11-27T19:36:24Z")
Sure, I hope that its not a conflict of interest on the forums, but I went with an Acorn CNC from Centroid. For starters I don’t have a X-Carve or any out of the box machine. I started with an Open Builds Sphinx and have at the current time built my own machine running ballscrews and linear rails, so its quite beefy of a machine. The probe that I purchased was a normally closed probe, however in GRBL you can only have 1 probe input, and that meant that I could no longer use my touch plate. I really liked GRBL Panel but its no longer supported and even at its best is limited to only 4 macros, no probing cycles, only one probe input etc. So really not ideal for where I am trying to get to. All of this information came to me a week after I got this X-Controller, and I probably only used it for a few operations. ---
**Author:** ![GregBara](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@GregBara](https://community.inventables.com/u/GregBara)\ **Post date:** [November 30, 2018, 9:20pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/6 "2018-11-30T21:20:13Z")
Pictures added. ---
**Author:** ![DouglasHarrison](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/douglasharrison/32/52217_2.png) [@DouglasHarrison](https://community.inventables.com/u/DouglasHarrison)\ **Post date:** [December 1, 2018, 12:11am UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/7 "2018-12-01T00:11:00Z")
I am interested would you take PayPal / ships to 38588 ---
**Author:** ![GregBara](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@GregBara](https://community.inventables.com/u/GregBara)\ **Post date:** [December 1, 2018, 12:39am UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/8 "2018-12-01T00:39:56Z")
Yes, Paypal is all I will accept. Message me and we can exchange info. ---
**Author:** ![LarryM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/larrym/32/51450_2.png) [@LarryM](https://community.inventables.com/u/LarryM)\ **Post date:** [December 1, 2018, 12:51am UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/9 "2018-12-01T00:51:06Z")
> [@GregBara](#): > > The probe that I purchased was a normally closed probe, however in GRBL you can only have 1 probe input, and that meant that I could no longer use my touch plate. I’m confused a bit about this statement. It is true that there is only one probe pin on the Arduino UNO R3 version of grbl, but it can be used in a normally closed or normally open configuration. Although you can’t probe all axes simultaneously you can have a macro set up that will probe all axes. I must me missing something from your description. Can you restate your issue please? ---
**Author:** ![GregBara](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@GregBara](https://community.inventables.com/u/GregBara)\ **Post date:** [December 1, 2018, 1:32am UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/10 "2018-12-01T01:32:16Z")
I need 2 “probes”. One is a NC probe. The other is a NO touch off plate. GRBL only allows the assignment of either open or closed probe. I need both, not either or. ---
**Author:** ![LarryM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/larrym/32/51450_2.png) [@LarryM](https://community.inventables.com/u/LarryM)\ **Post date:** [December 1, 2018, 1:41am UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/11 "2018-12-01T01:41:05Z")
Thanks. ---
**Author:** ![GregBara](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@GregBara](https://community.inventables.com/u/GregBara)\ **Post date:** [December 2, 2018, 9:33pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/12 "2018-12-02T21:33:12Z")
Item has been sold. ---
**Author:** ![JessieFritz](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jessiefritz/32/68787_2.png) [@JessieFritz](https://community.inventables.com/u/JessieFritz)\ **Post date:** [December 3, 2018, 4:37pm UTC](https://community.inventables.com/t/inventables-x-controller-sold/64556/13 "2018-12-03T16:37:13Z")