# Interface compatible with X-Controller **URL:** \ **Category:** Upgrades\ **Created:** [March 15, 2022, 10:11pm UTC](https://community.inventables.com/t/interface-compatible-with-x-controller/130512 "2022-03-15T22:11:45Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![MarcoQuezada](https://avatars.discourse-cdn.com/v4/letter/m/13edae/32.png) [@MarcoQuezada](https://community.inventables.com/u/MarcoQuezada)\ **Post date:** [December 7, 2022, 3:43am UTC](https://community.inventables.com/t/interface-compatible-with-x-controller/130512/7 "2022-12-07T03:43:51Z")
I know this is an old thread, but if you are handy with electronics here’s what I use: > [@Grbl Hand-held Controller with Jog Wheel, DRO and built-in sender](https://community.inventables.com/t/grbl-hand-held-controller-with-jog-wheel-dro-and-built-in-sender/109009): > > I’ve been meaning to share this with the community for a few weeks now, but the end of year got in the way. I use a raspberry pi to drive the X-Controller and that has added flexibility to my setup. But this setup does not have a read-out or controls at the machine itself. The computer I use to drive it all is on a desk across the room about 10 feet away. Needless to say, doing tasks such as setting a work position origin had me jumping back and forth between the machine (looking at bit position… --- _[View the full topic](https://community.inventables.com/t/interface-compatible-with-x-controller/130512)._