# Inlarge connection Points

**URL:** <https://community.inventables.com/t/inlarge-connection-points/50780>\
**Category:** Uncategorized\
**Created:** [February 14, 2018, 8:39am UTC](https://community.inventables.com/t/inlarge-connection-points/50780 "2018-02-14T08:39:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![LarryBrauer](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/larrybrauer/32/56759_2.png) [@LarryBrauer](https://community.inventables.com/u/LarryBrauer)\
**Post date:** [February 14, 2018, 8:39am UTC](https://community.inventables.com/t/inlarge-connection-points/50780/1 "2018-02-14T08:39:24Z")

</div>

I need some help on my X-carve machine when doing 3D puzzles. When I download a project to do and change the size of the material thickness the connection points are to small to interlock with each other. I would like to see if anyone out there might give me some instructions on how to change just the connection points and not the whole item I am carving.

---

<div class="post-metadata">

**Author:** ![MarkA.Bachman](https://avatars.discourse-cdn.com/v4/letter/m/bb73d2/32.png) [@MarkA.Bachman](https://community.inventables.com/u/MarkA.Bachman)\
**Post date:** [February 14, 2018, 8:35pm UTC](https://community.inventables.com/t/inlarge-connection-points/50780/3 "2018-02-14T20:35:06Z")

</div>

There is a method of creating a rectangle the size of the slot you need. Lay it over where the slot needs to be set it to zero depth and then combine with part.  
Something like that.ake a copy and play with it.