# Importing G code thru Easel

**URL:** <https://community.inventables.com/t/importing-g-code-thru-easel/18265>\
**Category:** Uncategorized\
**Created:** [January 4, 2016, 4:14pm UTC](https://community.inventables.com/t/importing-g-code-thru-easel/18265 "2016-01-04T16:14:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TravisSwanlund](https://avatars.discourse-cdn.com/v4/letter/t/ed8c4c/32.png) [@TravisSwanlund](https://community.inventables.com/u/TravisSwanlund)\
**Post date:** [January 4, 2016, 4:14pm UTC](https://community.inventables.com/t/importing-g-code-thru-easel/18265/1 "2016-01-04T16:14:29Z")

</div>

I use Vcarve for my drawings and would like to import the Gcode thru Easel. My question is: When I save the file from Vcarve, do I save it with the Xcarve post processor or just as Gcode?

---

<div class="post-metadata">

**Author:** ![JustinRobbins](https://avatars.discourse-cdn.com/v4/letter/j/d2c977/32.png) [@JustinRobbins](https://community.inventables.com/u/JustinRobbins)\
**Post date:** [January 4, 2016, 9:51pm UTC](https://community.inventables.com/t/importing-g-code-thru-easel/18265/2 "2016-01-04T21:51:17Z")

</div>

You still need to use the X-Carve post processor. The X-Carve post processor simply processes the V-Carve G-Code in a way that is readable by GRBL.