hi out there i am new to all of this very new i received my turbo blue cnc on sunday and i have a play with it but now when i make a cut the bit sits 2-3 mm above where i am cutting,it goes around the pattern slowly comes down after every pass before cutting into my piece.I have a z-probe i have watch you tube videos on it and i cant find it in my easel so i can set my z-probe bit to make it the write height can anybody help me
Hi _ I am having the same problem using Easel/SainSmart. I entered the Puck height in the advanced settings - run the probe successfully but when I click on carve the bit stays way above the workpiece - HELP 
Got a link?
@SteveMorrisey Can you post your grbl settings?
I think this is what you are asking for ??
$0=10
$1=25
$2=0
$3=2
$4=0
$5=0
$6=0
$10=115
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=0
$23=0
$24=25.000
$25=500.000
$26=250
$27=1.000
$30=3000
$31=0
$32=0
$100=800.000
$101=800.000
$102=320.000
$110=1000.000
$111=1000.000
$112=600.000
$120=30.000
$121=30.000
$122=30.000
$130=250.000
$131=250.000
$132=200.000
Many Thanks -
Steve
Thanks Neil !!! - That Fixed the problem -
and thanks fr the incredibly fast response -
Steve