# Homing issue please help

**URL:** https://community.inventables.com/t/homing-issue-please-help/132275
**Category:** X-Carve
**Created:** [May 17, 2022, 10:35am UTC](https://community.inventables.com/t/homing-issue-please-help/132275 "2022-05-17T10:35:46Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![JoshCarr](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@JoshCarr](https://community.inventables.com/u/JoshCarr)
#### Post date: [May 17, 2022, 10:35am UTC](https://community.inventables.com/t/homing-issue-please-help/132275/1 "2022-05-17T10:35:46Z")

</div>

Hi all, when I home my machine in UGS it homes to the front left hand side then I zero it to carve it carves back ward s. what am I doing wrong???

---

<div class="post-metadata">

### Author: ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)
#### Post date: [May 17, 2022, 2:59pm UTC](https://community.inventables.com/t/homing-issue-please-help/132275/2 "2022-05-17T14:59:18Z")

</div>

Do jogging functions drive the machine in the correct directions?

& This is an xcarve, correct?

---

<div class="post-metadata">

### Author: ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)
#### Post date: [August 15, 2022, 2:59pm UTC](https://community.inventables.com/t/homing-issue-please-help/132275/3 "2022-08-15T14:59:41Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.