# Help with probe

**URL:** <https://community.inventables.com/t/help-with-probe/112036>\
**Category:** Uncategorized\
**Created:** [February 3, 2021, 5:43pm UTC](https://community.inventables.com/t/help-with-probe/112036 "2021-02-03T17:43:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![BobTomlinson](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bobtomlinson/32/72995_2.png) [@BobTomlinson](https://community.inventables.com/u/BobTomlinson)\
**Post date:** [February 3, 2021, 5:43pm UTC](https://community.inventables.com/t/help-with-probe/112036/1 "2021-02-03T17:43:23Z")

</div>

I am new to CNC, and built my own machine.  
My Zprobe is set up at 25.15 mm (about 1”)  
Problem is… when I set up my machine, and run probe in setup,  
It asks me to “Plug in my Probe” before I can continue.  
Then I have to run machine setup all over again,  
When I change bits and run probe, it asks me again to “Plug in the Probe” just before touching.  
My QUESTION IS: Is there a way to turn this request off?

…sincerely,  
Bob T_strong text_