# Help request for DC Mayan calendar **URL:** \ **Category:** Projects\ **Created:** [May 6, 2021, 4:26pm UTC](https://community.inventables.com/t/help-request-for-dc-mayan-calendar/117557 "2021-05-06T16:26:14Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![ZacharyMerz](https://avatars.discourse-cdn.com/v4/letter/z/53a042/32.png) [@ZacharyMerz](https://community.inventables.com/u/ZacharyMerz)\ **Post date:** [May 6, 2021, 4:26pm UTC](https://community.inventables.com/t/help-request-for-dc-mayan-calendar/117557/1 "2021-05-06T16:26:15Z")
Hey guys, I’ve been messing around with Easel some in an attempt to get more familiar with it. I found the Marvel Mayan calendar files on here and loaded the file up. Looks great and no issues with it. So I went out to Sandy Eggos website and grabbed the DC version. I loaded the SVG up in easel and it was just a bunch of outlines. I then went about assigning all the parts a cut path in Easel (very tedious lol). On its face it looks just like the Marvel one now. Except when i try click on it to move it around. Its like 1500 individual pieces, so you have to highlight them all to move the artwork as a whole. The Marvel file you can just click the image anywhere and move it all as one single piece. I think this is causing my file major bloating and crashes when i try to simulate the job. Marvel calendar has no issues simulating or anything. Any one have any suggestions? I’ll put a screen cap of the two for comparison. ![Marvel screenshot](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/e/bea9380f298e0d3cb8b1988c6f65400481216ca6.png) ![DC screenshot](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/0/f08e4d4ac8823d7a8ca8bd52596177d8ab538e20.png) ---
**Author:** ![Brandon\_Cullum](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandon_cullum/32/85007_2.png) [@Brandon\_Cullum](https://community.inventables.com/u/Brandon_Cullum)\ **Post date:** [May 6, 2021, 7:50pm UTC](https://community.inventables.com/t/help-request-for-dc-mayan-calendar/117557/2 "2021-05-06T19:50:11Z")
Can you share the Easel file? ---
**Author:** ![ZacharyMerz](https://avatars.discourse-cdn.com/v4/letter/z/53a042/32.png) [@ZacharyMerz](https://community.inventables.com/u/ZacharyMerz)\ **Post date:** [May 6, 2021, 8:16pm UTC](https://community.inventables.com/t/help-request-for-dc-mayan-calendar/117557/3 "2021-05-06T20:16:50Z")
Yup, I can. > **[DC Mayan](https://easel.inventables.com/projects/i8wUxtEDF1CZOONNgPkcbw)** > > by Zachary Merz ---
**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\ **Post date:** [May 7, 2021, 12:00am UTC](https://community.inventables.com/t/help-request-for-dc-mayan-calendar/117557/4 "2021-05-07T00:00:47Z")
Where’d tou get the Marvel Calendar? His original looks the same to me. Anyway, brought it into Inkscape, and the SVG below should work for you. Right-click–\>Save As ![DC-Calendar_fixed|0x0](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/1/5171e8bcf2f019ab36669dcc9db4c7db93074011.svg) ---
**Author:** ![SteveMoloney](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/stevemoloney/32/84542_2.png) [@SteveMoloney](https://community.inventables.com/u/SteveMoloney)\ **Post date:** [May 7, 2021, 9:42am UTC](https://community.inventables.com/t/help-request-for-dc-mayan-calendar/117557/5 "2021-05-07T09:42:39Z")
I have one of them and the star wars, I went through both of them and made them each one single layer, I have not tried the Marvel in Easel as of yet since I flattened it, the original file I had I ran it as a 28", it took it 1:15 to 1:30 minutes to write the tool paths if I remember correctly. I have ran the star wars one since I flattened it it ran well. Both are setup to be positive or negative of each other. > **[Copy of marvel comics\_Share](https://easel.inventables.com/projects/Jn25TpHV9Ckbvtt9PWMOOg)** > > by Steve Moloney ---
**Author:** ![ZacharyMerz](https://avatars.discourse-cdn.com/v4/letter/z/53a042/32.png) [@ZacharyMerz](https://community.inventables.com/u/ZacharyMerz)\ **Post date:** [May 7, 2021, 12:48pm UTC](https://community.inventables.com/t/help-request-for-dc-mayan-calendar/117557/6 "2021-05-07T12:48:02Z")
Thank you! I got the Marvel one off the forums here. The DC one I went to Sandy Eggos website and downloaded it from there. Imported the SVG straight into Easel. What did you do with it in Inkscape?