# Help on J-Tech Laser **URL:** \ **Category:** Software\ **Created:** [July 11, 2019, 2:39pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060 "2019-07-11T14:39:09Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![KristianAng](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kristianang/32/84778_2.png) [@KristianAng](https://community.inventables.com/u/KristianAng)\ **Post date:** [July 11, 2019, 2:39pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/1 "2019-07-11T14:39:10Z")
Help, Help Help Is it here on the forum some nice and helpful person who can help me with installing and runing of the laser with the program LightBurn. ? I have wired up everything as the instruction says. And I have gone thru the whole tutorial PDF wich I have downloaded and hade beside me when I tried to cut. But the machine didn´t start at the point I suggested The machine will go the the lower left corner, so I have to force it to stop with the emergency button. ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [July 11, 2019, 3:13pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/2 "2019-07-11T15:13:57Z")
Get ahold of Jay from JTECH and he will walk you thru it. He is great with costumer service. ---
**Author:** ![KristianAng](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kristianang/32/84778_2.png) [@KristianAng](https://community.inventables.com/u/KristianAng)\ **Post date:** [July 11, 2019, 3:40pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/3 "2019-07-11T15:40:45Z")
I have not get any answer from him yet. thats why I put the quastion here ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [July 11, 2019, 4:01pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/4 "2019-07-11T16:01:36Z")
I can not help you with lightburn i used picsender now. I had the same problem with grbllaser and gave it up. ---
**Author:** ![KristianAng](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kristianang/32/84778_2.png) [@KristianAng](https://community.inventables.com/u/KristianAng)\ **Post date:** [July 11, 2019, 4:31pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/5 "2019-07-11T16:31:03Z")
is the picsender easier to use ? ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [July 11, 2019, 4:42pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/6 "2019-07-11T16:42:00Z")
I like it i think it is much easier and alot easier to get things lined up where you want. ---
**Author:** ![KristianAng](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kristianang/32/84778_2.png) [@KristianAng](https://community.inventables.com/u/KristianAng)\ **Post date:** [July 11, 2019, 5:19pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/7 "2019-07-11T17:19:03Z")
where do you buy it and can I try it before I buy it. ---
**Author:** ![HalfNormal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/halfnormal/32/35048_2.png) [@HalfNormal](https://community.inventables.com/u/HalfNormal)\ **Post date:** [July 11, 2019, 6:19pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/8 "2019-07-11T18:19:58Z")
> **[LightBurn Software Forum](https://forum.lightburnsoftware.com/)** > > A place for LightBurn software users to help and be helped [https://www.picengrave.com/PicSender.htm](https://www.picengrave.com/PicSender.htm) ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [July 11, 2019, 6:36pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/9 "2019-07-11T18:36:51Z")
Try this. [www.picengrave.com - PicSender](https://www.picengrave.com/PicSender.htm) ---
**Author:** ![KristianAng](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kristianang/32/84778_2.png) [@KristianAng](https://community.inventables.com/u/KristianAng)\ **Post date:** [July 11, 2019, 7:14pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/10 "2019-07-11T19:14:43Z")
thx Wayne I look in to it on saturday, because we are going to Denmark tomorrow… Is there an try before buy. ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [July 11, 2019, 7:39pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/11 "2019-07-11T19:39:52Z")
I think there is you will need to check the site out. ---
**Author:** ![KristianAng](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kristianang/32/84778_2.png) [@KristianAng](https://community.inventables.com/u/KristianAng)\ **Post date:** [July 13, 2019, 10:10am UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/12 "2019-07-13T10:10:54Z")
Hi Wayne I have been looking on the link you sent me but… I can´t get the hang of it to , cut a picture . PLease give me a hint… If it´s not to much problem Kristian ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [July 13, 2019, 12:10pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/13 "2019-07-13T12:10:19Z")
I think you need to get John from Picsender to chime in. ---
**Author:** ![KristianAng](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kristianang/32/84778_2.png) [@KristianAng](https://community.inventables.com/u/KristianAng)\ **Post date:** [July 13, 2019, 12:31pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/14 "2019-07-13T12:31:38Z")
ok thx ---
**Author:** ![JohnChamplain](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/johnchamplain/32/75884_2.png) [@JohnChamplain](https://community.inventables.com/u/JohnChamplain)\ **Post date:** [July 13, 2019, 2:52pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/15 "2019-07-13T14:52:01Z")
Kristian, I will be happy to assist you. Please contact me at: [www.PicEngrave.com - Contact](https://www.picengrave.com/Contact.htm) Thank you, John ---
**Author:** ![SamGironda](https://avatars.discourse-cdn.com/v4/letter/s/3ab097/32.png) [@SamGironda](https://community.inventables.com/u/SamGironda)\ **Post date:** [July 13, 2019, 11:33pm UTC](https://community.inventables.com/t/help-on-j-tech-laser/75060/16 "2019-07-13T23:33:02Z")
read up on Negative Work Coordinates. These are sections on both the Lightburn and Jtech sites. Mine did the same thing before I setup a macro to fix it