# Hanging Keyhole

**URL:** <https://community.inventables.com/t/hanging-keyhole/52586>\
**Category:** Projects\
**Created:** [March 15, 2018, 5:38pm UTC](https://community.inventables.com/t/hanging-keyhole/52586 "2018-03-15T17:38:27Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\
**Post date:** [March 22, 2018, 6:40pm UTC](https://community.inventables.com/t/hanging-keyhole/52586/22 "2018-03-22T18:40:19Z")

</div>

I would use a straight cut bit. I think i used a 1/8" for the program.

---

<div class="post-metadata">

**Author:** ![BrandonTreadway](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandontreadway/32/55243_2.png) [@BrandonTreadway](https://community.inventables.com/u/BrandonTreadway)\
**Post date:** [March 22, 2018, 7:26pm UTC](https://community.inventables.com/t/hanging-keyhole/52586/23 "2018-03-22T19:26:13Z")

</div>

Thanks for the help! Hopefully I’ll get it working tonight when I get home from work.

---

<div class="post-metadata">

**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\
**Post date:** [March 22, 2018, 7:27pm UTC](https://community.inventables.com/t/hanging-keyhole/52586/24 "2018-03-22T19:27:51Z")

</div>

It should work. Let me know how you get along.

---

<div class="post-metadata">

**Author:** ![ThomasCrawn](https://avatars.discourse-cdn.com/v4/letter/t/48db29/32.png) [@ThomasCrawn](https://community.inventables.com/u/ThomasCrawn)\
**Post date:** [March 31, 2018, 12:20pm UTC](https://community.inventables.com/t/hanging-keyhole/52586/25 "2018-03-31T12:20:11Z")

</div>

Used it last night. Didn’t read instructions at first but after I did it worked well

---

<div class="post-metadata">

**Author:** ![KenTimblinSr](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kentimblinsr/32/86549_2.png) [@KenTimblinSr](https://community.inventables.com/u/KenTimblinSr)\
**Post date:** [March 31, 2018, 4:48pm UTC](https://community.inventables.com/t/hanging-keyhole/52586/26 "2018-03-31T16:48:33Z")

</div>

Well i finally had time to try this… after searching 20 minutes for the bit i had in my hand I got a chance to run it… worked like a champ, laid out as a “1/8” bottom surfacing bit… **_thanks!_**

 ![keyhole](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/4/3/4358edc390e4c94a013c90720d981d393bf4daeb.jpg)

[Previous page](https://community.inventables.com/t/hanging-keyhole/52586.md?page=1)