# Gshield wiring sequence unknown

**URL:** <https://community.inventables.com/t/gshield-wiring-sequence-unknown/115785>\
**Category:** Troubleshooting\
**Created:** [March 25, 2021, 12:46am UTC](https://community.inventables.com/t/gshield-wiring-sequence-unknown/115785 "2021-03-25T00:46:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![KamProjects](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@KamProjects](https://community.inventables.com/u/KamProjects)\
**Post date:** [March 25, 2021, 12:46am UTC](https://community.inventables.com/t/gshield-wiring-sequence-unknown/115785/1 "2021-03-25T00:46:32Z")

</div>

Hey, I got a used xcarve (1000x1000) some time ago and I have not been able to get it going properly. I have no idea where the wires are supposed to connect to the pins on the back of the fan. The plastic piece for the wires have always been loose. Do you guys know the sequence?

---

<div class="post-metadata">

**Author:** ![BrandonR\_Parker](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandonr_parker/32/13853_2.png) [@BrandonR\_Parker](https://community.inventables.com/u/BrandonR_Parker)\
**Post date:** [March 25, 2021, 1:17am UTC](https://community.inventables.com/t/gshield-wiring-sequence-unknown/115785/2 "2021-03-25T01:17:37Z")

</div>

See if this gets you going…

> **[X-Carve Instructions: Electronics](https://x-carve-instructions.inventables.com/xcarve2015/step14/)**
>
> X-Carve Instructions

{:0)

Brandon Parker

---

<div class="post-metadata">

**Author:** ![KamProjects](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@KamProjects](https://community.inventables.com/u/KamProjects)\
**Post date:** [March 25, 2021, 2:07pm UTC](https://community.inventables.com/t/gshield-wiring-sequence-unknown/115785/3 "2021-03-25T14:07:35Z")

</div>

That got me up and going, thanks! Just need to get y and z axis wired correctly next.