# GraphScad --- visual interface for OpenSCAD **URL:** \ **Category:** Software\ **Created:** [April 18, 2019, 7:42pm UTC](https://community.inventables.com/t/graphscad-visual-interface-for-openscad/71965 "2019-04-18T19:42:22Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![WillAdams](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/willadams/32/67263_2.png) [@WillAdams](https://community.inventables.com/u/WillAdams)\ **Post date:** [April 18, 2019, 7:42pm UTC](https://community.inventables.com/t/graphscad-visual-interface-for-openscad/71965/1 "2019-04-18T19:42:22Z")
Found this and thought it was an interesting alternative to coding in OpenSCAD: > **[GraphScad](https://graphscad.blogspot.com/)** > > graphscad is a nodal editor to create customized 3D objects for 3D printing. Hoping it’ll be useful for my Kickstarter. ---
**Author:** ![WillAdams](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/willadams/32/67263_2.png) [@WillAdams](https://community.inventables.com/u/WillAdams)\ **Post date:** [April 29, 2019, 2:23pm UTC](https://community.inventables.com/t/graphscad-visual-interface-for-openscad/71965/2 "2019-04-29T14:23:26Z")
After experimenting it with a bit, while the interface is quite nice, I found the way it re-defined OpenSCAD code awkward, and how to extend it inscrutable, so have instead switched to using: [https://www.blockscad3d.com/](https://www.blockscad3d.com/) which can easily be run locally, and allows one to instantly see the OpenSCAD representation. ---
**Author:** ![PeterJakab1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/peterjakab1/32/72608_2.png) [@PeterJakab1](https://community.inventables.com/u/PeterJakab1)\ **Post date:** [April 29, 2019, 3:01pm UTC](https://community.inventables.com/t/graphscad-visual-interface-for-openscad/71965/3 "2019-04-29T15:01:50Z")
I like it. Thanks.