# Fusion 360 issue

**URL:** <https://community.inventables.com/t/fusion-360-issue/21977>\
**Category:** X-Carve\
**Created:** [April 1, 2016, 11:42pm UTC](https://community.inventables.com/t/fusion-360-issue/21977 "2016-04-01T23:42:45Z")\
**Posts on this page:** 2\
**Page:** 0

<div class="post-metadata">

**Author:** ![EmilianoMolina](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/emilianomolina/32/67350_2.png) [@EmilianoMolina](https://community.inventables.com/u/EmilianoMolina)\
**Post date:** [April 2, 2016, 11:23am UTC](https://community.inventables.com/t/fusion-360-issue/21977/5 "2016-04-02T11:23:10Z")

</div>

Does how much it leaves change if you use a thinner bit?

---

<div class="post-metadata">

**Author:** ![EmilianoMolina](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/emilianomolina/32/67350_2.png) [@EmilianoMolina](https://community.inventables.com/u/EmilianoMolina)\
**Post date:** [April 3, 2016, 12:18am UTC](https://community.inventables.com/t/fusion-360-issue/21977/7 "2016-04-03T00:18:07Z")

</div>

Good find Phil.