# First time cutting aluminum. Success

**URL:** <https://community.inventables.com/t/first-time-cutting-aluminum-success/146962>\
**Category:** X-Carve\
**Created:** [September 29, 2023, 1:39pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962 "2023-09-29T13:39:00Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Daryl1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/daryl1/32/84640_2.png) [@Daryl1](https://community.inventables.com/u/Daryl1)\
**Post date:** [September 29, 2023, 1:39pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/1 "2023-09-29T13:39:01Z")

</div>

After some research i took the plunge and started playing with aluminum and im hooked i love it it cuts so nice and my head is just full of ideas but heres a pic of my first project, that has actually led me to cutting these into serial numbers for boats for a local boat manufacturer in town, and i couldnt be happier(as per third pic)! fourth pic its installed on boat! happy carving!

 ![IMG_1887](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/6/0/601513d3f843a782a5fbd3bfd338fcb90ab4d55a.jpeg)  
 ![IMG_1890](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/3/5327c317954b27c4f828ae8ae4e98fe248907890.jpeg)  
 ![IMG_2012](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/4/b/4ba637ed3eb42e94b9c1e1d532c94d669bcb1b6a.jpeg)  
 ![IMG_2035](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/8/1/81ee5771073cef2d2ef8b106787f2590aaefa4dc.jpeg)

---

<div class="post-metadata">

**Author:** ![Robert10](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/robert10/32/76753_2.png) [@Robert10](https://community.inventables.com/u/Robert10)\
**Post date:** [September 29, 2023, 1:49pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/2 "2023-09-29T13:49:56Z")

</div>

I love using my XCP for aluminum. Cuts super clean and no chatter. Great your having fun and success.

---

<div class="post-metadata">

**Author:** ![Daryl1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/daryl1/32/84640_2.png) [@Daryl1](https://community.inventables.com/u/Daryl1)\
**Post date:** [September 29, 2023, 2:09pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/3 "2023-09-29T14:09:15Z")

</div>

yeah. thank you at first was not sure but it went ok only problem i have is i should have bought the x carve pro Regrets…

---

<div class="post-metadata">

**Author:** ![Robert10](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/robert10/32/76753_2.png) [@Robert10](https://community.inventables.com/u/Robert10)\
**Post date:** [September 29, 2023, 2:34pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/4 "2023-09-29T14:34:03Z")

</div>

Did you use tape and glue method for holding? I almost exclusively use this method. I bought the 1000mm machine about 3 years ago and really loved it… just needed more real estate on the wasteboard and less space in the wallet. Lol

---

<div class="post-metadata">

**Author:** ![Justin4131](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/justin4131/32/84823_2.png) [@Justin4131](https://community.inventables.com/u/Justin4131)\
**Post date:** [October 22, 2023, 4:53pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/5 "2023-10-22T16:53:42Z")

</div>

Solid work. What kind of bit are you using? I am getting ready to cut some today.

---

<div class="post-metadata">

**Author:** ![JosephJohnson1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/josephjohnson1/32/84160_2.png) [@JosephJohnson1](https://community.inventables.com/u/JosephJohnson1)\
**Post date:** [October 22, 2023, 5:14pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/6 "2023-10-22T17:14:08Z")

</div>

Beautiful work!

Looking forward to when I finally get through the earning curve far enough to progress to working with metals. This is an inspiration for me, so thanks for sharing 🙏

---

<div class="post-metadata">

**Author:** ![Daryl1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/daryl1/32/84640_2.png) [@Daryl1](https://community.inventables.com/u/Daryl1)\
**Post date:** [November 13, 2023, 3:19pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/7 "2023-11-13T15:19:48Z")

</div>

i use 60 degree 90 degree bits and 1/8 2 flute upcut bits

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [February 11, 2024, 3:20pm UTC](https://community.inventables.com/t/first-time-cutting-aluminum-success/146962/8 "2024-02-11T15:20:07Z")

</div>

Closed on February 11, 2024, 3:20pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.
